Scholarlink

<p>The high-entropy alloy(HEA) samples FeCoNiCrTi<sub>0.3</sub>, FeCoNiCrTi<sub>0.5</sub>, FeCoNiCrAl<sub>0.5</sub> were designed and prepared by laser melting deposition (LMD), and their microstructure characterization were observed, physical phase analysis, and tensile properties were investigated. The results show that the microstructure at the top of the same LMD-HEA sample is smaller than that at the bottom. FeCoNiCrTi<sub>0.5</sub>, FeCoNiCrTi<sub>0.3</sub>, and FeCoNiCrAl<sub>0.5</sub> are all single-phase FCC structures, and the results of XRD and EBSD analysis are consistent. The fracture stroke of FeCoNiCrTi<sub>0.3</sub> is greater than that of FeCoNiCrTi<sub>0.5</sub>, the tensile strength of FeCoNiCrTi<sub>0.5</sub> is larger but the section shrinkage is smaller. The maximum breaking load of FeCoNiCrTi<sub>0.5</sub> is slightly larger than that of FeCoNiCrAl<sub>0.5</sub>, the tensile strength of FeCoNiCrTi<sub>0.5</sub> is larger than that of FeCoNiCrAl<sub>0.5</sub>, the fracture shrinkage is smaller than that of FeCoNiCrAl<sub>0.5</sub>, and there is little difference in the elongation. The number of dimples in the tensile fracture of FeCoNiCrTi<sub>0.3</sub> is significantly higher than that of FeCoNiCrTi<sub>0.5</sub>, and the fracture of FeCoNiCrTi<sub>0.5</sub> is more flat and smooth. This study guides the study of the mechanical properties of LMD-HEA and is helpful for the high-performance design and integrated manufacturing of LMD-HEA composite components.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Experimental study on microstructure and tensile properties of high entropy alloy by laser melting deposition

  • 期刊论文

  • 发表日期：

    2025年2月24日

查看全文
  • Wen-Bo Zhang,
  • Xue-Long Wen,
  • Jia-Yu Li,
  • Ya-Dong Gong

摘要

The high-entropy alloy(HEA) samples FeCoNiCrTi0.3, FeCoNiCrTi0.5, FeCoNiCrAl0.5 were designed and prepared by laser melting deposition (LMD), and their microstructure characterization were observed, physical phase analysis, and tensile properties were investigated. The results show that the microstructure at the top of the same LMD-HEA sample is smaller than that at the bottom. FeCoNiCrTi0.5, FeCoNiCrTi0.3, and FeCoNiCrAl0.5 are all single-phase FCC structures, and the results of XRD and EBSD analysis are consistent. The fracture stroke of FeCoNiCrTi0.3 is greater than that of FeCoNiCrTi0.5, the tensile strength of FeCoNiCrTi0.5 is larger but the section shrinkage is smaller. The maximum breaking load of FeCoNiCrTi0.5 is slightly larger than that of FeCoNiCrAl0.5, the tensile strength of FeCoNiCrTi0.5 is larger than that of FeCoNiCrAl0.5, the fracture shrinkage is smaller than that of FeCoNiCrAl0.5, and there is little difference in the elongation. The number of dimples in the tensile fracture of FeCoNiCrTi0.3 is significantly higher than that of FeCoNiCrTi0.5, and the fracture of FeCoNiCrTi0.5 is more flat and smooth. This study guides the study of the mechanical properties of LMD-HEA and is helpful for the high-performance design and integrated manufacturing of LMD-HEA composite components.