Scholarlink

<p>Directed energy deposition (DED) is a viable manufacturing method for producing large-sized complex structural engineering parts, yet it suffers from inherent drawbacks of low processing efficiency and high residual stress. Here, the fabrication of a long-wall titanium-alloy part was pioneered using a self-developed parallel multi-arc DED technique. The deposition efficiency is as high as 1.34&#xa0;kg h<sup>−1</sup>, which is approximately four times that of the well-established single DED (0.336&#xa0;kg&#xa0;h<sup>−1</sup>). As revealed by experimental testing and finite element analysis, multi-arc DED significantly reduces the distortion (from 74.9 to 55.2&#xa0;mm) and the residual stress (from 82.1 to 39.6&#xa0;MPa for the long-wall part), compared with those of the single-arc DED counterpart. Crack formation is effectively suppressed via argon atmosphere during the DED manufacturing process, which is associated with improved ductility. The mechanical properties of the multi-arc DED part are position-independent and consistent, and similar to those of the single-arc DED part. The joint areas of the multi-arc DED show a disordered distribution of α phase, in contrast to parallel α phases distributed in the base area, as well as the single-arc DED part. Thus, our work paves a viable way for the efficient and low-residual-stress fabrication of large-sized titanium alloy parts by the parallel multi-arc DED pathway.</p> Graphical Abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Towards high efficiency and low residual stress for parallel multi-arc directed energy deposited titanium-alloy components with uniform mechanical properties

  • 期刊论文

  • 发表日期：

    2026年5月12日

查看全文
  • Yuanxuan Zheng,
  • Qifei Han,
  • Yueling Guo,
  • Ruixiao Zheng,
  • Xingchen Li,
  • Jiayuan Cui,
  • Bo Yin,
  • Changmeng Liu

摘要

Directed energy deposition (DED) is a viable manufacturing method for producing large-sized complex structural engineering parts, yet it suffers from inherent drawbacks of low processing efficiency and high residual stress. Here, the fabrication of a long-wall titanium-alloy part was pioneered using a self-developed parallel multi-arc DED technique. The deposition efficiency is as high as 1.34 kg h−1, which is approximately four times that of the well-established single DED (0.336 kg h−1). As revealed by experimental testing and finite element analysis, multi-arc DED significantly reduces the distortion (from 74.9 to 55.2 mm) and the residual stress (from 82.1 to 39.6 MPa for the long-wall part), compared with those of the single-arc DED counterpart. Crack formation is effectively suppressed via argon atmosphere during the DED manufacturing process, which is associated with improved ductility. The mechanical properties of the multi-arc DED part are position-independent and consistent, and similar to those of the single-arc DED part. The joint areas of the multi-arc DED show a disordered distribution of α phase, in contrast to parallel α phases distributed in the base area, as well as the single-arc DED part. Thus, our work paves a viable way for the efficient and low-residual-stress fabrication of large-sized titanium alloy parts by the parallel multi-arc DED pathway.

Graphical Abstract