Scholarlink

<p>Owing to their excellent strength-to-weight ratio, honeycomb sandwich structures have long been favored in impact mitigation and energy absorption applications. Integrating wood-plastic composites into 3D-printed bioinspired sandwich designs offers a sustainable path toward enhanced mechanical performance. In this study, the out-of-plane compressive behavior of two 3D-printed bioinspired configurations, traditional Honeycomb Plate (HP) and End-trabecular Beetle Elytron Plate (EBEP), was systematically investigated using both experimental testing and finite element simulations. Fabrication of the sandwich plates involved two material systems: Polylactic Acid (PLA) and PLA reinforced with Wood Fibers (WF). In addition, the microstructures of the two material systems were examined, and a cost analysis was conducted. Results demonstrate that the incorporation of WF significantly improves both the specific load-bearing capacity and specific energy absorption of the structures, with EBEP showing greater performance gains than HP. Microstructural analysis reveals that the performance enhancement stems from multiple reinforcement mechanisms contributed by the WF. The close agreement between experimental and simulation results confirms the reliability of the proposed model and sheds light on the reinforcing role of WF. The EBEP structure made from PLA/WF demonstrates a lightweight, high-strength, and cost-effective solution. These findings offer theoretical support for the development of cost-effective and eco-friendly high-performance energy-absorbing structures.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Out-of-Plane Compression Performance of 3D-Printed Eco-friendly Sandwich Plates Inspired by Beetle Elytra Microstructures

  • 期刊论文

  • 发表日期：

    2026年4月8日

查看全文
  • Yiheng Song,
  • Haixia Yang,
  • Chenwei Guo,
  • Jie Chen,
  • Longgang Tian

摘要

Owing to their excellent strength-to-weight ratio, honeycomb sandwich structures have long been favored in impact mitigation and energy absorption applications. Integrating wood-plastic composites into 3D-printed bioinspired sandwich designs offers a sustainable path toward enhanced mechanical performance. In this study, the out-of-plane compressive behavior of two 3D-printed bioinspired configurations, traditional Honeycomb Plate (HP) and End-trabecular Beetle Elytron Plate (EBEP), was systematically investigated using both experimental testing and finite element simulations. Fabrication of the sandwich plates involved two material systems: Polylactic Acid (PLA) and PLA reinforced with Wood Fibers (WF). In addition, the microstructures of the two material systems were examined, and a cost analysis was conducted. Results demonstrate that the incorporation of WF significantly improves both the specific load-bearing capacity and specific energy absorption of the structures, with EBEP showing greater performance gains than HP. Microstructural analysis reveals that the performance enhancement stems from multiple reinforcement mechanisms contributed by the WF. The close agreement between experimental and simulation results confirms the reliability of the proposed model and sheds light on the reinforcing role of WF. The EBEP structure made from PLA/WF demonstrates a lightweight, high-strength, and cost-effective solution. These findings offer theoretical support for the development of cost-effective and eco-friendly high-performance energy-absorbing structures.