Scholarlink

<p>A proof-of-concept accelerometer for ultra-low and low-frequency vibration sensing is presented. The device integrates a high-sensitivity Giant Magnetoimpedance (GMI) sensor with a 3D-printed magnetized resonant structure, based on the low Young’s modulus of polymers and the geometric versatility of additive manufacturing to explore its potential as an alternative sensing approach to conventional piezoelectric sensors in the low-frequency regime. The sensing architecture consists of a serpentine-like PLA resonator combined with a self-manufactured hard magnetic composite of cobalt-doped ferrite nanoparticles Co<sub>x</sub>Fe<sub>3−x</sub>O<sub>4</sub> embedded in a polycaprolactone matrix. Finite Element Method (FEM) simulations were utilized to optimize the geometry, ensuring fundamental resonant modes within the targeted ultra-low-frequency range. Experimental results demonstrate a primary resonant response between 8 and 11&#xa0;Hz, maintaining high detection reliability even at peak-to-peak acceleration levels as low as 0.05&#xa0;g. Furthermore, the sensing performance is shown to be highly tunable by adjusting the magnetic nanoparticle loading or remanent magnetization, while the addition of proof masses allows for post-fabrication frequency shifting down to 4.3&#xa0;Hz. This work demonstrates a low-cost, contactless, and reconfigurable platform for sensing ultra-low and low-frequency vibrations even at low acceleration levels.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

3D-printed multiresonant sensor for ultra-low frequency vibration monitoring

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年4月29日

查看全文
  • J. Gómez-Hurtado,
  • D. Liguori,
  • I. Royo-Silvestre,
  • D. Gandía,
  • J. M. Algueta-Miguel,
  • J. Hernández-Saz,
  • C. Gómez-Polo,
  • E. Garaio,
  • A. López-Ortega,
  • J. J. Beato-López

摘要

A proof-of-concept accelerometer for ultra-low and low-frequency vibration sensing is presented. The device integrates a high-sensitivity Giant Magnetoimpedance (GMI) sensor with a 3D-printed magnetized resonant structure, based on the low Young’s modulus of polymers and the geometric versatility of additive manufacturing to explore its potential as an alternative sensing approach to conventional piezoelectric sensors in the low-frequency regime. The sensing architecture consists of a serpentine-like PLA resonator combined with a self-manufactured hard magnetic composite of cobalt-doped ferrite nanoparticles CoxFe3−xO4 embedded in a polycaprolactone matrix. Finite Element Method (FEM) simulations were utilized to optimize the geometry, ensuring fundamental resonant modes within the targeted ultra-low-frequency range. Experimental results demonstrate a primary resonant response between 8 and 11 Hz, maintaining high detection reliability even at peak-to-peak acceleration levels as low as 0.05 g. Furthermore, the sensing performance is shown to be highly tunable by adjusting the magnetic nanoparticle loading or remanent magnetization, while the addition of proof masses allows for post-fabrication frequency shifting down to 4.3 Hz. This work demonstrates a low-cost, contactless, and reconfigurable platform for sensing ultra-low and low-frequency vibrations even at low acceleration levels.