Scholarlink

<p>The present study developed a relationship between the (a) compressive strength and static Modulus of Elasticity (MOE), (b) compressive strength and dynamic MOE, and (c) the static MOE and dynamic MOE for sintered fly ash aggregates based concrete. This is the first detailed study to propose MOE models for concrete using sintered fly ash aggregates (SFA) validated across five mix designs and 120 specimens. The existing codes overestimate the MOE for SFA based lightweight concrete. To determine static MOE, the cylindrical specimens have been placed under uniaxial compression in strain-controlled mode, and a compressometer has been used to measure the MOE. The ultrasonic pulse velocity and dry density of concrete with different strength ranges were measured to evaluate the dynamic MOE of concrete produced using SFA. The MOE of concrete produced using SFA as coarse aggregate is around 30–35% lower than that of normal-weight concrete. The static modulus of elasticity of lightweight concrete with SFA ranged between 16 GPa and 27 GPa, whereas the dynamic modulus of elasticity of lightweight concrete with SFA ranged between 19 GPa and 28 GPa for a compressive strength range of 20–55&#xa0;MPa. Based on the experimental results, an empirical equation has been developed for estimating static MOE and dynamic MOE, and the relationship between static and dynamic MOE. The developed equations have been compared with those in the codes and literature. The developed models enhance accuracy in structural analysis and design through reliable estimation of MOE, and propose an alternative, quick, and easy method to estimate dynamic MOE for SFA-based lightweight concrete using the ultrasonic pulse velocity method.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Empirical Model for Static and Dynamic Modulus of Elasticity for Sintered Flyash Lightweight Aggregate Based Concrete

  • 期刊论文

  • 发表日期：

    2025年9月4日

查看全文
  • Brijesh Singh,
  • Shamsher Bahadur Singh,
  • Sudhirkumar V. Barai,
  • P. N. Ojha,
  • Rohit Kumar

摘要

The present study developed a relationship between the (a) compressive strength and static Modulus of Elasticity (MOE), (b) compressive strength and dynamic MOE, and (c) the static MOE and dynamic MOE for sintered fly ash aggregates based concrete. This is the first detailed study to propose MOE models for concrete using sintered fly ash aggregates (SFA) validated across five mix designs and 120 specimens. The existing codes overestimate the MOE for SFA based lightweight concrete. To determine static MOE, the cylindrical specimens have been placed under uniaxial compression in strain-controlled mode, and a compressometer has been used to measure the MOE. The ultrasonic pulse velocity and dry density of concrete with different strength ranges were measured to evaluate the dynamic MOE of concrete produced using SFA. The MOE of concrete produced using SFA as coarse aggregate is around 30–35% lower than that of normal-weight concrete. The static modulus of elasticity of lightweight concrete with SFA ranged between 16 GPa and 27 GPa, whereas the dynamic modulus of elasticity of lightweight concrete with SFA ranged between 19 GPa and 28 GPa for a compressive strength range of 20–55 MPa. Based on the experimental results, an empirical equation has been developed for estimating static MOE and dynamic MOE, and the relationship between static and dynamic MOE. The developed equations have been compared with those in the codes and literature. The developed models enhance accuracy in structural analysis and design through reliable estimation of MOE, and propose an alternative, quick, and easy method to estimate dynamic MOE for SFA-based lightweight concrete using the ultrasonic pulse velocity method.