Purpose <p>The CyberKnife delivers precise radiation with sharp dose gradients challenging to measure. N-isopropylacrylamide (NIPAM) gel phantom can capture 3D dose distributions effectively. This study investigates the feasibility of using NIPAM gel dosimetry combined with magnetic resonance imaging (MRI)-based transverse relaxation rate (R2) mapping to verify dose distributions delivered by the CyberKnife system.</p> Methods <p>A total of 24 gel samples were divided into 8 dose groups (0, 3, 6, 9, 12, 15, 18, and 21&#xa0;Gy), with three samples per dose group for repeat measurements. The NIPAM polymer gels were irradiated by a CyberKnife<sup>®</sup> M6 FIM system with a 6 MV x-ray beam. MR images of the NIPAM gel phantom were made 24&#xa0;h after irradiation using the 3T MRI scanner. The R2 maps corresponding to dose distribution were analyzed using Matlab software.</p> Results <p>Our results demonstrate that R2 values increase with rising irradiation doses, confirming dose-dependent sensitivity. The dose-response curve exhibits a slope of 0.1688&#xa0;Gy⁻¹ s⁻¹, reflecting the gel dosimeter’s sensitivity, with a strong correlation (R² = 0.85, <i>p</i> = 0.001). Additionally, R2 values vary with depth, peaking at the 30&#xa0;mm dose center point (D<sub>center</sub>) and then gradually decreasing, indicating maximum dose accumulation at D<sub>center</sub> followed by a decline with increasing depth.</p> Conclusion <p>This study demonstrates that NIPAM gel dosimetry with MRI-based R2 mapping effectively verifies CyberKnife dose distributions. It exhibits strong dose sensitivity and accurately captures sharp gradients, highlighting its potential as a superior alternative to conventional dosimetry methods.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Investigating the Sensitivity of NIPAM Gel Dosimetry in CyberKnife Systems Using MRI-based R2 Mapping

  • Yu-Hsuan Lin,
  • Shih-Wei Huang,
  • Hung-Yi Chen,
  • Hao-Ting Lan,
  • Feng-Yi Su,
  • Shin-Lei Peng,
  • Chun-Hsu Yao

摘要

Purpose

The CyberKnife delivers precise radiation with sharp dose gradients challenging to measure. N-isopropylacrylamide (NIPAM) gel phantom can capture 3D dose distributions effectively. This study investigates the feasibility of using NIPAM gel dosimetry combined with magnetic resonance imaging (MRI)-based transverse relaxation rate (R2) mapping to verify dose distributions delivered by the CyberKnife system.

Methods

A total of 24 gel samples were divided into 8 dose groups (0, 3, 6, 9, 12, 15, 18, and 21 Gy), with three samples per dose group for repeat measurements. The NIPAM polymer gels were irradiated by a CyberKnife® M6 FIM system with a 6 MV x-ray beam. MR images of the NIPAM gel phantom were made 24 h after irradiation using the 3T MRI scanner. The R2 maps corresponding to dose distribution were analyzed using Matlab software.

Results

Our results demonstrate that R2 values increase with rising irradiation doses, confirming dose-dependent sensitivity. The dose-response curve exhibits a slope of 0.1688 Gy⁻¹ s⁻¹, reflecting the gel dosimeter’s sensitivity, with a strong correlation (R² = 0.85, p = 0.001). Additionally, R2 values vary with depth, peaking at the 30 mm dose center point (Dcenter) and then gradually decreasing, indicating maximum dose accumulation at Dcenter followed by a decline with increasing depth.

Conclusion

This study demonstrates that NIPAM gel dosimetry with MRI-based R2 mapping effectively verifies CyberKnife dose distributions. It exhibits strong dose sensitivity and accurately captures sharp gradients, highlighting its potential as a superior alternative to conventional dosimetry methods.