Scholarlink

<p>Scalable fabrication of efficient wide-bandgap (WBG) perovskite solar cells (PSCs) is crucial to realize the full commercial potential of tandem solar cells. However, there are challenges in fabricating efficient methylammonium-free (MA-free) WBG PSCs by blade coating, especially its phase separation and films stability. In this work, an MA-free WBG perovskite ink is developed for preparing FA<sub>0.8</sub>Cs<sub>0.2</sub>Pb(I<sub>0.75</sub>Br<sub>0.25</sub>)<sub>3</sub> films by blade coating in ambient air. Among various A-site iodides, RbI is found to be the most effective in suppressing the precipitation of PbI<sub>2</sub> induced by Pb(SCN)<sub>2</sub> while keeping the enlarged grains. The distribution of Rb suggested that the Rb ions are kept isolated with the perovskite grains during the crystallization and Ostwald ripening processes, which contributes to the formation of the large-grain WBG perovskite film with minimum non-radiative recombination. As a result, a power conversion efficiency (PCE) of 23.0% was achieved on small-area WBG PSCs, while mini-modules with an aperture area of 10.5&#xa0;cm<sup>2</sup> exhibited a PCE of 20.2%, among the highest reported for solar cells prepared with WBG perovskites via blade coating. This work presents a scalable and reproducible fabrication strategy for stable MA-free WBG PSCs under ambient conditions, advancing their path toward commercialization.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Scalable Fabrication of Methylammonium-Free Wide-Bandgap Perovskite Solar Cells by Blade Coating in Ambient Air

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年7月1日

查看全文
  • Jianbo Liu,
  • Meng Zhang,
  • Xiaoran Sun,
  • Linhu Xiang,
  • Xiangyu Yang,
  • Xin Hu,
  • Zhicheng Wang,
  • Tian Hou,
  • Jinzhao Qin,
  • Yuelong Huang,
  • Mojtaba Abdi-Jalebi,
  • Xiaojing Hao

摘要

Scalable fabrication of efficient wide-bandgap (WBG) perovskite solar cells (PSCs) is crucial to realize the full commercial potential of tandem solar cells. However, there are challenges in fabricating efficient methylammonium-free (MA-free) WBG PSCs by blade coating, especially its phase separation and films stability. In this work, an MA-free WBG perovskite ink is developed for preparing FA0.8Cs0.2Pb(I0.75Br0.25)3 films by blade coating in ambient air. Among various A-site iodides, RbI is found to be the most effective in suppressing the precipitation of PbI2 induced by Pb(SCN)2 while keeping the enlarged grains. The distribution of Rb suggested that the Rb ions are kept isolated with the perovskite grains during the crystallization and Ostwald ripening processes, which contributes to the formation of the large-grain WBG perovskite film with minimum non-radiative recombination. As a result, a power conversion efficiency (PCE) of 23.0% was achieved on small-area WBG PSCs, while mini-modules with an aperture area of 10.5 cm2 exhibited a PCE of 20.2%, among the highest reported for solar cells prepared with WBG perovskites via blade coating. This work presents a scalable and reproducible fabrication strategy for stable MA-free WBG PSCs under ambient conditions, advancing their path toward commercialization.