Scholarlink

<p>The applicability of additive manufacturing (AM) of duplex stainless steels has been limited by the complex thermal history causing an imbalance of ferrite and austenite in the as-deposited material. Laser-beam directed energy deposition with wire (DED-LB/w) presents a promising solution when combined with solution annealing. This study utilizes a specially developed 3Dprint AM 2205 and a conventional ER2209 wire to continuously build cylindrical components. Metallographic examination was conducted using light optical microscopy (LOM), scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), electron backscatter diffraction (EBSD), and electron microprobe analysis (EPMA). While high deposition rates were achievable, excessively high wire feeding rates led to continuous areas of fine grains in the deposited beads. These regions, identified as partially molten wire, were sometimes associated with lack-of-fusion, porosity, and solidification cracking. Optimized parameter settings enabled efficient melting of the wire, producing defect-free deposits, and eliminating partially molten wire residues. Solution annealing effectively dissolved intermetallics and homogenized the microstructure, resulting in a more uniform phase distribution.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Enhancing duplex stainless steel additive manufacturing with DED-LB/w: microstructural analysis and process optimization

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年4月29日

查看全文
  • Elin Marianne Westin,
  • Maria Asuncion Valiente Bermejo,
  • Björn Axelsson,
  • Kjell Hurtig,
  • Petter Hagqvist,
  • Jan Yngve Jonsson

摘要

The applicability of additive manufacturing (AM) of duplex stainless steels has been limited by the complex thermal history causing an imbalance of ferrite and austenite in the as-deposited material. Laser-beam directed energy deposition with wire (DED-LB/w) presents a promising solution when combined with solution annealing. This study utilizes a specially developed 3Dprint AM 2205 and a conventional ER2209 wire to continuously build cylindrical components. Metallographic examination was conducted using light optical microscopy (LOM), scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), electron backscatter diffraction (EBSD), and electron microprobe analysis (EPMA). While high deposition rates were achievable, excessively high wire feeding rates led to continuous areas of fine grains in the deposited beads. These regions, identified as partially molten wire, were sometimes associated with lack-of-fusion, porosity, and solidification cracking. Optimized parameter settings enabled efficient melting of the wire, producing defect-free deposits, and eliminating partially molten wire residues. Solution annealing effectively dissolved intermetallics and homogenized the microstructure, resulting in a more uniform phase distribution.