Scholarlink

<p>This study presents a numerical approach using a 3D finite element model to quantify the remaining clamp load of a plastic nut joint after a specific time. The viscoelastic relaxation of a thermoplastic nut, which is predominantly screwed on a welding stud, is described by a material card using Prony Series. Prony Series are derived from experimental dynamical mechanical analysis with different moisture and fiber contents of the thermoplastic. Since plastic nuts usually do not have preformed threads, the increased temperatures and resulting stresses from the thread-forming process are considered in the simulation. An FE model is created and verified by substrate stress relaxation tests. Experimental clamp load measurements with miniature compression load cells verify the clamp load prediction and show a good agreement. The developed model is used to analyze the clamp load distribution within the threads and reveals an almost even distribution within the threads.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Numerical modeling of clamp load relaxation of plastic nuts under varying moisture and fiber contents

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年1月14日

查看全文
  • Jan Wippermann,
  • Gerson Meschut

摘要

This study presents a numerical approach using a 3D finite element model to quantify the remaining clamp load of a plastic nut joint after a specific time. The viscoelastic relaxation of a thermoplastic nut, which is predominantly screwed on a welding stud, is described by a material card using Prony Series. Prony Series are derived from experimental dynamical mechanical analysis with different moisture and fiber contents of the thermoplastic. Since plastic nuts usually do not have preformed threads, the increased temperatures and resulting stresses from the thread-forming process are considered in the simulation. An FE model is created and verified by substrate stress relaxation tests. Experimental clamp load measurements with miniature compression load cells verify the clamp load prediction and show a good agreement. The developed model is used to analyze the clamp load distribution within the threads and reveals an almost even distribution within the threads.