Scholarlink

<p>The current study reports the dye adsorption of methylene blue (MB) on PANi, PANi-treated cadmium ferrite, and the composite (50% PANi/50% cadmium ferrite) adsorbents. The adsorbents were characterized using X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM). The semicrystalline and spinel structure of the prepared samples was confirmed via X-ray diffraction of the PANi and cadmium ferrite nanoparticles, respectively. The FT-IR spectra results confirm the vibration bands of PANi at the surface of cadmium ferrite nanoparticles. Two isotherm models were used to fit the adsorption data at equilibrium, and two kinetic models were used to fit the kinetic data. The kinetics of MB adsorption were evaluated at different contact times (5, 15, 25, 35, and 40) min. Both ferrite and the composite adsorbent fit well with the pseudo-second-order kinetic model, with R<sup>2</sup> values of 0.998 and 0.9871, respectively. In contrast, the samples of PANi and treated PANi fit well with the pseudo-first-order model. The MB adsorption process fitting the Langmuir model (R<sup>2</sup> = 0.9851, 0.9655, 0.9783, 0.9729, PANi, PANi treated, cadmium ferrite, and the composite (50% cadmium ferrite: 50%PANi), respectively and the maximum adsorption capacity (17.921&#xa0;mg&#xa0;g<sup>−1</sup>) for the adsorbent treated PANi. The highest removal yield was found to be 85% when the adsorbed condition was 0.05&#xa0;g of treated PANi in 50&#xa0;mL of a 10&#xa0;ppm&#xa0;MB dye solution, at a pH of 3, and an adsorption time of 40&#xa0;min.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Efficient removal of MB dye from wastewater via cadmium ferrite nanocomposites

  • 期刊论文

  • 发表日期：

    2025年8月30日

查看全文
  • A. H. Abdalsalam,
  • S. M. Alardhi,
  • A. A. Ati,
  • S. Bassim,
  • R. A. Ismail,
  • S. S. Shaker,
  • S. Dabagh

摘要

The current study reports the dye adsorption of methylene blue (MB) on PANi, PANi-treated cadmium ferrite, and the composite (50% PANi/50% cadmium ferrite) adsorbents. The adsorbents were characterized using X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM). The semicrystalline and spinel structure of the prepared samples was confirmed via X-ray diffraction of the PANi and cadmium ferrite nanoparticles, respectively. The FT-IR spectra results confirm the vibration bands of PANi at the surface of cadmium ferrite nanoparticles. Two isotherm models were used to fit the adsorption data at equilibrium, and two kinetic models were used to fit the kinetic data. The kinetics of MB adsorption were evaluated at different contact times (5, 15, 25, 35, and 40) min. Both ferrite and the composite adsorbent fit well with the pseudo-second-order kinetic model, with R2 values of 0.998 and 0.9871, respectively. In contrast, the samples of PANi and treated PANi fit well with the pseudo-first-order model. The MB adsorption process fitting the Langmuir model (R2 = 0.9851, 0.9655, 0.9783, 0.9729, PANi, PANi treated, cadmium ferrite, and the composite (50% cadmium ferrite: 50%PANi), respectively and the maximum adsorption capacity (17.921 mg g−1) for the adsorbent treated PANi. The highest removal yield was found to be 85% when the adsorbed condition was 0.05 g of treated PANi in 50 mL of a 10 ppm MB dye solution, at a pH of 3, and an adsorption time of 40 min.