Abstract <p>Stabilizers play a crucial role in enhancing the durability of polymers, and recent interest in sustainable materials has accelerated the exploration of natural antioxidants as alternatives to traditional synthetic stabilizers. While antioxidants isolated from natural sources have already been integrated into polymers, the direct introduction of antioxidant-rich biomasses, like microalgae, offers a promising yet less explored approach. This study evaluates the effectiveness of microalgae biomass as a polyethylene (PE) stabilizer, using spirulina (washed and unwashed) and <i>Tetraselmis striata</i>. Antioxidant content was assessed through various extraction agents, revealing that water extracts of spirulina contained the highest polyphenol content (940.35&#xa0;mg/100&#xa0;g) and antioxidant activity. These biomasses were then integrated into a PE matrix at different loadings (0–30%) and processed by compression molding, while <i>Tetraselmis</i> was also processed by rotomolding. Washed spirulina significantly enhanced thermo-oxidative stability in PE, with a 30% loading yielding a 197% increase in oxidation induction time (OIT). <i>Tetraselmis</i> also proved to be effective, extending OIT from 0.6 to 44.7&#xa0;min in compression-molded PE at the highest load. However, <i>Tetraselmis</i> did not yield similar results in rotomolding, where no notable OIT improvement was observed. Comparatively, unwashed spirulina provided moderate stability enhancements, though less effective than the washed biomass. This study suggests that microalgae, particularly washed spirulina, are viable eco-friendly stabilizers for PE, opening pathways for more sustainable polymer development.</p> Graphical abstract <p>A novel amino acid-based hydrogel formed by the self-assembly of Fmoc-L leucine and Fmoc-L lysine , which consisted of twisted nanobelts, displayed antibacterial activity against Gram-positive and Gram-negative bacteria.</p> <p></p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

A preliminary study on the use of microalgae biomass as a polyolefin stabilizer

  • Sara Díaz,
  • Francisco Romero,
  • Luis Suárez,
  • Abbas Tcharkhtchi,
  • Zaida Ortega

摘要

Abstract

Stabilizers play a crucial role in enhancing the durability of polymers, and recent interest in sustainable materials has accelerated the exploration of natural antioxidants as alternatives to traditional synthetic stabilizers. While antioxidants isolated from natural sources have already been integrated into polymers, the direct introduction of antioxidant-rich biomasses, like microalgae, offers a promising yet less explored approach. This study evaluates the effectiveness of microalgae biomass as a polyethylene (PE) stabilizer, using spirulina (washed and unwashed) and Tetraselmis striata. Antioxidant content was assessed through various extraction agents, revealing that water extracts of spirulina contained the highest polyphenol content (940.35 mg/100 g) and antioxidant activity. These biomasses were then integrated into a PE matrix at different loadings (0–30%) and processed by compression molding, while Tetraselmis was also processed by rotomolding. Washed spirulina significantly enhanced thermo-oxidative stability in PE, with a 30% loading yielding a 197% increase in oxidation induction time (OIT). Tetraselmis also proved to be effective, extending OIT from 0.6 to 44.7 min in compression-molded PE at the highest load. However, Tetraselmis did not yield similar results in rotomolding, where no notable OIT improvement was observed. Comparatively, unwashed spirulina provided moderate stability enhancements, though less effective than the washed biomass. This study suggests that microalgae, particularly washed spirulina, are viable eco-friendly stabilizers for PE, opening pathways for more sustainable polymer development.

Graphical abstract

A novel amino acid-based hydrogel formed by the self-assembly of Fmoc-L leucine and Fmoc-L lysine , which consisted of twisted nanobelts, displayed antibacterial activity against Gram-positive and Gram-negative bacteria.