<p>In this study, a novel 2D method for measuring soil surface suction, leveraging infrared thermal imaging technology is presented. The main principle of this method is the establishment of a correlation between soil surface water content and a normalized interfacial temperature difference. Subsequently, we link unsaturated soil surface suction to the normalized interfacial temperature difference through the soil-water characteristic curve. To validate the proposed method, an in-situ calibration test was conducted to ascertain the requisite parameters. Then, the method was tested under varying meteorological conditions at two distinct in-situ sites using the same test protocol as the calibration phase. The results demonstrate a strong agreement compared to measured values, affirming the feasibility and robustness of the proposed approach. This method offers several noteworthy advantages, including rapidity, non-contact operation, non-destructiveness, and robustness to environmental fluctuations. It holds promise for advancing investigation of the spatial and temporal evolution of hydro-mechanical properties of in-situ soil under the influence of climate change.</p>