Scholarlink

<p>The outstanding performance of O3-type NaNi<sub>1/3</sub>Fe<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub> (NFM111) at both high and low temperatures coupled with its impressive specific capacity makes it an excellent cathode material for sodium-ion batteries. However, its poor cycling, owing to high-pressure phase transitions, is one of its disadvantages. In this study, Cu/Ti was introduced into NFM111 cathode material using a solid-phase method. Through both theoretically and experimentally, this study found that Cu doping provides a higher redox potential in NFM111, improving its reversible capacity and charge compensation process. The introduction of Ti would enhance the cycling stability of the material, smooth its charge and discharge curves, and suppress its high-voltage phase transitions. Accordingly, the NaNi<sub>0.27</sub>Fe<sub>0.28</sub>Mn<sub>0.33</sub>Cu<sub>0.05</sub>Ti<sub>0.06</sub>O<sub>2</sub> sample used in the study exhibited a remarkable rate performance of 142.97 mAh·g<sup>−1</sup> at 0.1C (2.0–4.2 V) and an excellent capacity retention of 72.81% after 300 cycles at 1C (1C = 150 mA·g<sup>−1</sup>).</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Cu/Ti-doped O3-type cathode materials for high cyclic stability of sodium-ion batteries

  • 期刊论文

  • 发表日期：

    2025年12月22日

查看全文
  • Jingjing Dong,
  • Liu Pei,
  • Yifei Wang,
  • Yan Liu,
  • Xingliang Liu,
  • Zhidan Diao,
  • Jianling Li,
  • Yejing Li,
  • Xindong Wang

摘要

The outstanding performance of O3-type NaNi1/3Fe1/3Mn1/3O2 (NFM111) at both high and low temperatures coupled with its impressive specific capacity makes it an excellent cathode material for sodium-ion batteries. However, its poor cycling, owing to high-pressure phase transitions, is one of its disadvantages. In this study, Cu/Ti was introduced into NFM111 cathode material using a solid-phase method. Through both theoretically and experimentally, this study found that Cu doping provides a higher redox potential in NFM111, improving its reversible capacity and charge compensation process. The introduction of Ti would enhance the cycling stability of the material, smooth its charge and discharge curves, and suppress its high-voltage phase transitions. Accordingly, the NaNi0.27Fe0.28Mn0.33Cu0.05Ti0.06O2 sample used in the study exhibited a remarkable rate performance of 142.97 mAh·g−1 at 0.1C (2.0–4.2 V) and an excellent capacity retention of 72.81% after 300 cycles at 1C (1C = 150 mA·g−1).