Scholarlink

<p>This study quantitatively evaluated the impact of differences in computed tomography (CT) numbers and elemental compositions between commercially available brain-tissue-equivalent density plugs (BDPs) and actual brain tissue on dose calculations in a radiation therapy treatment planning system (RTPS). The mass density and elemental composition of BDP were analyzed using elemental analysis and X-ray fluorescence spectroscopy. The CT numbers of the BDP and actual brain tissue were measured and compared, with effective atomic numbers (EANs) calculated based on compositional analysis and the International Commission on Radiological Protection Publication 110 data for brain tissues. The theoretical CT numbers were derived using the stoichiometric CT number calibration (SCC) method. The dose calculations were performed using the modified CT number-to-relative electron density (RED) and mass density (MD) conversion tables in Eclipse v16.1, employing AAA and Acuros XB algorithms, employing the physical material table in AcurosXB_13.5. The dose metrics D<sub>2%</sub>, D<sub>50%</sub>, and D<sub>98%</sub> were evaluated. Significant differences in elemental composition were found, particularly in carbon (73.26% in BDP vs. 14.3% in brain tissue) and oxygen (12.52% in BDP vs. 71.3% in brain tissue). The EANs were 6.6 for BDP and 7.4 for brain tissue. The mean CT numbers were 23.30 HU for the BDP and 37.30 HU for brain tissue, a 14 HU discrepancy. Nevertheless, dose calculation deviations were minimal, typically within ± 0.2%, with a maximum discrepancy of 0.6% for D<sub>98%</sub>. Although CT numbers and elemental compositions exhibited notable differences, their impact on dose calculations in the evaluated RTPS algorithms was negligible.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Impact of discrepancies between CT numbers of brain-tissue-equivalent density plug and actual brain tissue on dose calculation accuracy

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年5月12日

查看全文
  • Shogo Tsunemine,
  • Shuichi Ozawa,
  • Minoru Nakao,
  • Satoru Sugimoto,
  • Tetsuya Tomida,
  • Michitoshi Ito,
  • Masumi Numano,
  • Hideyuki Harada

摘要

This study quantitatively evaluated the impact of differences in computed tomography (CT) numbers and elemental compositions between commercially available brain-tissue-equivalent density plugs (BDPs) and actual brain tissue on dose calculations in a radiation therapy treatment planning system (RTPS). The mass density and elemental composition of BDP were analyzed using elemental analysis and X-ray fluorescence spectroscopy. The CT numbers of the BDP and actual brain tissue were measured and compared, with effective atomic numbers (EANs) calculated based on compositional analysis and the International Commission on Radiological Protection Publication 110 data for brain tissues. The theoretical CT numbers were derived using the stoichiometric CT number calibration (SCC) method. The dose calculations were performed using the modified CT number-to-relative electron density (RED) and mass density (MD) conversion tables in Eclipse v16.1, employing AAA and Acuros XB algorithms, employing the physical material table in AcurosXB_13.5. The dose metrics D2%, D50%, and D98% were evaluated. Significant differences in elemental composition were found, particularly in carbon (73.26% in BDP vs. 14.3% in brain tissue) and oxygen (12.52% in BDP vs. 71.3% in brain tissue). The EANs were 6.6 for BDP and 7.4 for brain tissue. The mean CT numbers were 23.30 HU for the BDP and 37.30 HU for brain tissue, a 14 HU discrepancy. Nevertheless, dose calculation deviations were minimal, typically within ± 0.2%, with a maximum discrepancy of 0.6% for D98%. Although CT numbers and elemental compositions exhibited notable differences, their impact on dose calculations in the evaluated RTPS algorithms was negligible.