Scholarlink

<p>Composite carboxymethyl cellulose (CMC)-based films containing olive leaf extract (OLE) and the polysaccharide fraction from olive leaves (PFOL) were produced by a solvent casting method. The effects of OLE and PFOL contents on physical and functional properties of CMC composite films were assessed using a two-factor, five-level central composite design. Overall, water barrier properties of CMC-based films were significantly improved upon OLE and PFOL incorporation as confirmed by the observed reduction in their water absorption and water vapor permeability (WVP). Likewise, increasing PFOL content from 0 to 60 wt% significantly enhanced the flexibility of CMC/PFOL composite films, most likely due the increased mobility of CMC chains due to the formation of new hydrogen bonds between the CMC chains and the phenolic compounds in PFOL. Furthermore, the incorporation of OLE and PFOL endowed the CMC composite films with higher antioxidant capacity and excellent light barrier properties. Using the desirability function approach, an OLE contents of 0.51 wt% and 59.85 wt% PFOL were identified as the optimum factor levels providing maximum %<i>E</i> (23.28%), higher antioxidant activity (1.1&#xa0;µmol TE/mg extract), and minimum WVP (17.62&#xa0;g&#xa0;mm&#xa0;m<sup>−2</sup> j<sup>−1</sup>&#xa0;kPa<sup>−1</sup>), with an overall desirability of 0.984.</p> Graphical Abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Functional Properties Optimization of Carboxymethylcellulose-Based Films Enriched with Bioactive Compounds from Olive Leaf Co-products

  • 期刊论文

  • 发表日期：

    2025年8月7日

查看全文
  • Hajer Aloui,
  • Yassine M’Rabet,
  • Monia El Ouni,
  • Khaoula Khwaldia

摘要

Composite carboxymethyl cellulose (CMC)-based films containing olive leaf extract (OLE) and the polysaccharide fraction from olive leaves (PFOL) were produced by a solvent casting method. The effects of OLE and PFOL contents on physical and functional properties of CMC composite films were assessed using a two-factor, five-level central composite design. Overall, water barrier properties of CMC-based films were significantly improved upon OLE and PFOL incorporation as confirmed by the observed reduction in their water absorption and water vapor permeability (WVP). Likewise, increasing PFOL content from 0 to 60 wt% significantly enhanced the flexibility of CMC/PFOL composite films, most likely due the increased mobility of CMC chains due to the formation of new hydrogen bonds between the CMC chains and the phenolic compounds in PFOL. Furthermore, the incorporation of OLE and PFOL endowed the CMC composite films with higher antioxidant capacity and excellent light barrier properties. Using the desirability function approach, an OLE contents of 0.51 wt% and 59.85 wt% PFOL were identified as the optimum factor levels providing maximum %E (23.28%), higher antioxidant activity (1.1 µmol TE/mg extract), and minimum WVP (17.62 g mm m−2 j−1 kPa−1), with an overall desirability of 0.984.

Graphical Abstract