Scholarlink

<p>The present study uses electrochemical approaches, such as linear and cyclic polarization, to examine the effects of immersion time (7, 14, 21 and 28 days) on the corrosion behaviour of X70 and X80 line pipe steels in a simulated concrete pore solution (SCPS) contaminated with 3.5 wt% NaCl (pH ~ 12 to 13.8). The results show that the corrosion resistance of the X70 line pipe steel decreases from 7 to 21 days, and then increases significantly after 28 days. For the X80 line pipe steel, corrosion resistance improves from 7 to 14 days due to the preferential dissolution of the bainitic phase, which enables the building of a passive film. However, corrosion resistance declines after 21 days before improving again after 28 days. This occurrence can be ascribed to the formation of stable passive film on both the steels after extended immersion periods (beyond 28 days), driven by the elevated phase fraction of α/γ* in corrosion products, where α signifies the stable α-FeOOH phase and γ* encompasses the less stable phases, such as γ-FeOOH, β-FeOOH and Fe<sub>3</sub>O<sub>4</sub>.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Corrosion performance of X70 and X80 line pipe steels in a simulated concrete pore solution contaminated with 3.5 wt% NaCl

  • 期刊论文

  • 发表日期：

    2025年8月13日

查看全文
  • Athikamsetty Sumanth,
  • K Vishwanath,
  • Subrata Mukherjee,
  • K Mondal,
  • Harikrishna Kancharla

摘要

The present study uses electrochemical approaches, such as linear and cyclic polarization, to examine the effects of immersion time (7, 14, 21 and 28 days) on the corrosion behaviour of X70 and X80 line pipe steels in a simulated concrete pore solution (SCPS) contaminated with 3.5 wt% NaCl (pH ~ 12 to 13.8). The results show that the corrosion resistance of the X70 line pipe steel decreases from 7 to 21 days, and then increases significantly after 28 days. For the X80 line pipe steel, corrosion resistance improves from 7 to 14 days due to the preferential dissolution of the bainitic phase, which enables the building of a passive film. However, corrosion resistance declines after 21 days before improving again after 28 days. This occurrence can be ascribed to the formation of stable passive film on both the steels after extended immersion periods (beyond 28 days), driven by the elevated phase fraction of α/γ* in corrosion products, where α signifies the stable α-FeOOH phase and γ* encompasses the less stable phases, such as γ-FeOOH, β-FeOOH and Fe3O4.