Scholarlink

<p>Product miniaturization has become increasingly important in modern manufacturing due to market demands for compact devices with enhanced functionality. Micromilling has become a pivotal micromachining technology because of its capability to fabricate complex three-dimensional structures with high dimensional accuracy and material removal efficiency. Their functional performance depends critically on the microgeometry, condition, and integrity of the cutting edges. These factors directly influence chip formation mechanism, surface quality, burr generation, and tool wear. Given the micro sizes and brittle nature of these tools, their manufacturing process is a key factor influencing overall machining performance and cost. To enhance tool quality, reduce production time, and achieve smoother surfaces and cutting edges, the potential of Pulsed Electrochemical Machining (PECM) was investigated in previous study by fabricating two-flute micro end mills made of tool steel with cutting diameters around 1&#xa0;mm, achieving defined cutting edge geometries with minor and major cutting edge radii of 2.62 ± 0.23&#xa0;μm and 3.92 ± 1.30&#xa0;μm, respectively. The current study investigates the machining performance of the microcutting tools fabricated by the PECM process. To evaluate machining performance, the PECM manufactured microtools were tested by micromilling experiments on aluminium alloy 7075-T6. A comparative analysis was conducted against commercially available microtools of comparable size manufactured by grinding process. Key performance indicators, including cutting forces, tool wear, machined surface quality, and burr formation were evaluated.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Micromilling performance of cutting tools manufactured by pulsed electrochemical machining (PECM)

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年3月2日

查看全文
  • Abdul Wali,
  • Timo Platt,
  • Dirk Biermann

摘要

Product miniaturization has become increasingly important in modern manufacturing due to market demands for compact devices with enhanced functionality. Micromilling has become a pivotal micromachining technology because of its capability to fabricate complex three-dimensional structures with high dimensional accuracy and material removal efficiency. Their functional performance depends critically on the microgeometry, condition, and integrity of the cutting edges. These factors directly influence chip formation mechanism, surface quality, burr generation, and tool wear. Given the micro sizes and brittle nature of these tools, their manufacturing process is a key factor influencing overall machining performance and cost. To enhance tool quality, reduce production time, and achieve smoother surfaces and cutting edges, the potential of Pulsed Electrochemical Machining (PECM) was investigated in previous study by fabricating two-flute micro end mills made of tool steel with cutting diameters around 1 mm, achieving defined cutting edge geometries with minor and major cutting edge radii of 2.62 ± 0.23 μm and 3.92 ± 1.30 μm, respectively. The current study investigates the machining performance of the microcutting tools fabricated by the PECM process. To evaluate machining performance, the PECM manufactured microtools were tested by micromilling experiments on aluminium alloy 7075-T6. A comparative analysis was conducted against commercially available microtools of comparable size manufactured by grinding process. Key performance indicators, including cutting forces, tool wear, machined surface quality, and burr formation were evaluated.