Scholarlink

<p>On a global basis, the utilization of metallic nanoparticles for improving residual oil recovery has grown dramatically, and nanofluids are widely used in hydrocarbons containing reservoirs to promote the recovery of hydrocarbons. An experimental study was conducted at nominal salinity (NaCl 2.0 wt%) to examine the significance with the addition of magnesium oxide (MgO) and titanium dioxide (TiO<sub>2</sub>) with Pure bore produced nanofluid to improve the recovery of oil that was further validated with statistical analysis. The experimental study used particle size analysis in conjunction with TDS, pH, EDX, FTIR, and XRD of MgO and TiO<sub>2</sub> to completely comprehend the nanofluid. To get insight into structure, the microstructure of MgO, TiO<sub>2</sub>, and nanofluid was examined. The effect of Pure bore concentration (0.10–0.50wt%) with MgO and TiO<sub>2</sub> concentrations (0.05–0.40wt%) in brine solution (NaCl 2.0wt%) with Pure bore. Analysis of the stability of the nanofluid was aided by the microscopic analysis and validated with statistical analysis using CCD. Additionally, the outcome of pH, viscosity, and salt was investigated. The optimum concentrations of the nanofluid MgO 0.10 wt%, TiO<sub>2</sub> 0.10 wt%, and Pure bore 0.40 wt% were attained at low–medium-salinity conditions (NaCl 2.0 wt%). Its suitability for use in minimal–moderate reservoirs was further validated through 2D contour map, interaction plot, and surface plot with CCD in MINITAB software. It can be noted that nanofluid prepared with Pure bore (0.40 wt%) with TiO<sub>2</sub> (0.10 wt%) marks better results and can be applied in low-salinity (NaCl 2.0 wt%) reservoirs to improve oil recovery.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Performance of nanoparticle MgO/TiO2 nanofluids with Pure bore: insight into statistical and analytical approach

  • 期刊论文

  • 发表日期：

    2025年1月21日

查看全文
  • Zeeshan Ali Lashari,
  • Shaine Mohammadali Lalji,
  • Qamar Yasin,
  • Abdulaziz Bentalib,
  • Abdulrahman Bin Jumah

摘要

On a global basis, the utilization of metallic nanoparticles for improving residual oil recovery has grown dramatically, and nanofluids are widely used in hydrocarbons containing reservoirs to promote the recovery of hydrocarbons. An experimental study was conducted at nominal salinity (NaCl 2.0 wt%) to examine the significance with the addition of magnesium oxide (MgO) and titanium dioxide (TiO2) with Pure bore produced nanofluid to improve the recovery of oil that was further validated with statistical analysis. The experimental study used particle size analysis in conjunction with TDS, pH, EDX, FTIR, and XRD of MgO and TiO2 to completely comprehend the nanofluid. To get insight into structure, the microstructure of MgO, TiO2, and nanofluid was examined. The effect of Pure bore concentration (0.10–0.50wt%) with MgO and TiO2 concentrations (0.05–0.40wt%) in brine solution (NaCl 2.0wt%) with Pure bore. Analysis of the stability of the nanofluid was aided by the microscopic analysis and validated with statistical analysis using CCD. Additionally, the outcome of pH, viscosity, and salt was investigated. The optimum concentrations of the nanofluid MgO 0.10 wt%, TiO2 0.10 wt%, and Pure bore 0.40 wt% were attained at low–medium-salinity conditions (NaCl 2.0 wt%). Its suitability for use in minimal–moderate reservoirs was further validated through 2D contour map, interaction plot, and surface plot with CCD in MINITAB software. It can be noted that nanofluid prepared with Pure bore (0.40 wt%) with TiO2 (0.10 wt%) marks better results and can be applied in low-salinity (NaCl 2.0 wt%) reservoirs to improve oil recovery.