Scholarlink

<p>The cold gas spray (CS) technique has emerged as a promising coating deposition method in the last decades for many materials, including Ti and most recently metal matrix composites, such as graphene-reinforced Ti. In this study, CS Ti coatings reinforced with two types of carbon nanofibers (GFs), HCNFs and MWCNTs, were evaluated regarding their electrochemical, electrical, and thermal properties before and after heat treatments (HT) at 700 and 1000&#xa0;°C. The results indicated that incorporating GFs did not alter the CS Ti coatings deposition efficiency, porosity, or hardness in as-sprayed condition. HT reduced the CS Ti and Ti-GFs coatings resistivity by 21 and 23%, respectively, as well as improved their thermal conductivity by 25 and 32%, respectively. CS Ti-GFs coatings demonstrated an impressive reduction in corrosion rate of up to 80% compared to unreinforced Ti. These findings highlight the potential of CS Ti-GFs composite coatings applied through CS for industrial applications requiring high corrosion resistance. However, improvements by incorporating GFs in Ti powder in thermal and electrical properties were limited, indicating the need to optimize matrix–reinforcement interaction and CS process parameters to maximize their performance in these areas. </p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Cold-Sprayed Ti-Carbon Nanofibers: Study of Conductive and Electrochemical Properties

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年5月13日

查看全文
  • Edwin Torres Díaz,
  • Alessio Silvello,
  • Edwin Rúa Ramirez,
  • Rodolpho Fernando Vaz,
  • Irene García Cano

摘要

The cold gas spray (CS) technique has emerged as a promising coating deposition method in the last decades for many materials, including Ti and most recently metal matrix composites, such as graphene-reinforced Ti. In this study, CS Ti coatings reinforced with two types of carbon nanofibers (GFs), HCNFs and MWCNTs, were evaluated regarding their electrochemical, electrical, and thermal properties before and after heat treatments (HT) at 700 and 1000 °C. The results indicated that incorporating GFs did not alter the CS Ti coatings deposition efficiency, porosity, or hardness in as-sprayed condition. HT reduced the CS Ti and Ti-GFs coatings resistivity by 21 and 23%, respectively, as well as improved their thermal conductivity by 25 and 32%, respectively. CS Ti-GFs coatings demonstrated an impressive reduction in corrosion rate of up to 80% compared to unreinforced Ti. These findings highlight the potential of CS Ti-GFs composite coatings applied through CS for industrial applications requiring high corrosion resistance. However, improvements by incorporating GFs in Ti powder in thermal and electrical properties were limited, indicating the need to optimize matrix–reinforcement interaction and CS process parameters to maximize their performance in these areas.