Scholarlink

<p>This research focuses on producing acrylonitrile-co-butadiene-co-styrene (ABS) components using the fused deposition modeling (FDM) technology. For this purpose, a series of tensile and surface roughness tests were performed to assess the primary mechanical properties of specimens. The geometrical data of the specimens was subjected to statistical analysis to assess the dimensional and mechanical performances utilized in the context of three-dimensional (3D) printing. It was found that the proportional limit and rise strength validate the distinct characteristics of ABS specimens produced using FDM regarding the ultimate tensile strength, proportional limit stress, and surface roughness. Also, it was essential to consider the disparities above and the derived permissible thresholds for the ascertained mechanical properties to design diminutive structures. The findings of this study proposed the utilization of ABS components in the FDM approach for producing diminutive structural components and the execution of necessary validations.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Evaluating the Mechanical Properties and Process Capability Analysis of Acrylonitrile Butadiene Styrene Components Produced by Fused Deposition Modeling Technology

  • 期刊论文

  • 发表日期：

    2025年5月12日

查看全文
  • Ibrahim Sabry,
  • Abdel-Hamid Ismail Mourad,
  • Majid Naseri,
  • Ahmed Mohamed Mahmoud Ibrahim,
  • Sanan H. Khan,
  • Mohamed ElWakil

摘要

This research focuses on producing acrylonitrile-co-butadiene-co-styrene (ABS) components using the fused deposition modeling (FDM) technology. For this purpose, a series of tensile and surface roughness tests were performed to assess the primary mechanical properties of specimens. The geometrical data of the specimens was subjected to statistical analysis to assess the dimensional and mechanical performances utilized in the context of three-dimensional (3D) printing. It was found that the proportional limit and rise strength validate the distinct characteristics of ABS specimens produced using FDM regarding the ultimate tensile strength, proportional limit stress, and surface roughness. Also, it was essential to consider the disparities above and the derived permissible thresholds for the ascertained mechanical properties to design diminutive structures. The findings of this study proposed the utilization of ABS components in the FDM approach for producing diminutive structural components and the execution of necessary validations.