<p>Recent research has explored integrated pigment coatings for anticorrosion and antifouling in marine environments, focusing on zinc (Zn) and cuprous oxide (Cu<sub>2</sub>O) for their notable properties. However, their combined effects in the same coating have not been explored. This study investigates how Cu<sub>2</sub>O content impacts Zn-containing ethyl silicate coatings. The&#xa0;anticorrosion efficiency of the coating was found to be reduced&#xa0;and the&#xa0;release&#xa0;of Zn was slowed down by Cu<sub>2</sub>O via electrochemical impedance spectroscopy and atomic absorption spectroscopy measurements. The Zn release rate insignificantly changed with increasing Cu<sub>2</sub>O content. Interestingly, bacterial tests revealed that a coating with 10&#xa0;wt.% Cu<sub>2</sub>O showed the strongest antibacterial activity. After six months of field testing, this formulation retained its protective effects with minimal fouling. These findings highlight the interplay between Zn and Cu<sub>2</sub>O pigments and their potential to enhance coating performance.</p> Graphical Abstract <p></p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

High Antifouling Performance of Coatings Based on Cu2O and Flake ZnAl Composite for Steel Protection

  • Nguyen Hoang,
  • Truong Anh Khoa,
  • Le Thi Nhung,
  • Phan Minh Phuong,
  • Pham Duc Thinh,
  • Doan Phan Thao Tien,
  • Minh-Ty Nguyen,
  • Thanh-Danh Nguyen

摘要

Recent research has explored integrated pigment coatings for anticorrosion and antifouling in marine environments, focusing on zinc (Zn) and cuprous oxide (Cu2O) for their notable properties. However, their combined effects in the same coating have not been explored. This study investigates how Cu2O content impacts Zn-containing ethyl silicate coatings. The anticorrosion efficiency of the coating was found to be reduced and the release of Zn was slowed down by Cu2O via electrochemical impedance spectroscopy and atomic absorption spectroscopy measurements. The Zn release rate insignificantly changed with increasing Cu2O content. Interestingly, bacterial tests revealed that a coating with 10 wt.% Cu2O showed the strongest antibacterial activity. After six months of field testing, this formulation retained its protective effects with minimal fouling. These findings highlight the interplay between Zn and Cu2O pigments and their potential to enhance coating performance.

Graphical Abstract