Scholarlink

<p>An optical method is developed for determining the sooting limit in premixed burner-stabilized stagnation flame. The impact of a stagnant plate at varying heights above burner (HAB) on the sooting limit is investigated using the method. The method quantifies the soot generation by processing pixel values in the region of interest of flame images. In a series of consecutive conditions from soot-free flame to soot-rich flame, the sooting limit is identified by observing the occurrence of soot formation. Experimental results demonstrate that this method could effectively capture the sooting limit. A comparison of the sooting limit at different HABs reveals that when the HAB is lower than 10 mm, the stagnant plate has an inhibitory effect on soot generation, and the equivalence ratio required for the sooting limit increases as the HAB decreases. When the HAB is higher than 10mm, the stagnant plate ceases to impact the sooting limit.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Optical Measurement of Sooting Limits for Ethylene Premixed Burner-Stabilized Stagnation Flames

  • 期刊论文

  • 发表日期：

    2025年9月4日

查看全文
  • Hang Ren,
  • Yaoyao Ying,
  • Runtian Yu,
  • Zhiwei Su,
  • Kaixuan Yang,
  • Mingxiao Chen,
  • Dandan Qi,
  • Dong Liu

摘要

An optical method is developed for determining the sooting limit in premixed burner-stabilized stagnation flame. The impact of a stagnant plate at varying heights above burner (HAB) on the sooting limit is investigated using the method. The method quantifies the soot generation by processing pixel values in the region of interest of flame images. In a series of consecutive conditions from soot-free flame to soot-rich flame, the sooting limit is identified by observing the occurrence of soot formation. Experimental results demonstrate that this method could effectively capture the sooting limit. A comparison of the sooting limit at different HABs reveals that when the HAB is lower than 10 mm, the stagnant plate has an inhibitory effect on soot generation, and the equivalence ratio required for the sooting limit increases as the HAB decreases. When the HAB is higher than 10mm, the stagnant plate ceases to impact the sooting limit.