Scholarlink

<p><i>In-situ</i> formed high Mn steel coating reinforced by carbides was formed by laser surface alloying (LSA). Laser alloyed layers on 1Cr18Ni9Ti steel with Mn+W<sub>2</sub>C (specimen A), Mn+NiWC (specimen B) and Mn+SiC (specimen C) powders were fabricated to improve the wear and corrosion behavior of 1Cr18Ni9Ti steel blades in high speed mixers. Microstructure evolution, phases, element distribution, microhardness, wear and corrosion behavior of the laser alloyed layers were investigated. Results indicated that high Mn steel matrix composites with undissolved W<sub>2</sub>C, WC and other <i>in-situ</i> formed carbides were formed by LSA with Mn+W<sub>2</sub>C and Mn+NiWC while SiC totally dissolved into the high Mn matrix when adding Mn+SiC. Ni as the binding phase in Ni-WC powder decreased the crack sensitivity of the alloyed layer as compared with the addition of W<sub>2</sub>C powder. An improvement in average microhardness was achieved in the matrix in specimen A, B and C, with the value of 615, 602 and 277 HV<sub>0.5</sub>, while that of the substrate was 212 HV<sub>0.5</sub>. The increase of microhardness, wear and corrosion resistance is highly corelated to microstructure, formed phases, type and content of carbides, micro-hardness and toughness of the alloyed layers.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Microstructure and Wear/corrosion Resistance of Stainless Steel Laser-alloyed with Mn+W2C, Mn+NiWC and Mn+SiC

  • 期刊论文

  • 发表日期：

    2025年1月17日

查看全文
  • Rui Zhou,
  • Xiaogang Diao,
  • Yixin Sun

摘要

In-situ formed high Mn steel coating reinforced by carbides was formed by laser surface alloying (LSA). Laser alloyed layers on 1Cr18Ni9Ti steel with Mn+W2C (specimen A), Mn+NiWC (specimen B) and Mn+SiC (specimen C) powders were fabricated to improve the wear and corrosion behavior of 1Cr18Ni9Ti steel blades in high speed mixers. Microstructure evolution, phases, element distribution, microhardness, wear and corrosion behavior of the laser alloyed layers were investigated. Results indicated that high Mn steel matrix composites with undissolved W2C, WC and other in-situ formed carbides were formed by LSA with Mn+W2C and Mn+NiWC while SiC totally dissolved into the high Mn matrix when adding Mn+SiC. Ni as the binding phase in Ni-WC powder decreased the crack sensitivity of the alloyed layer as compared with the addition of W2C powder. An improvement in average microhardness was achieved in the matrix in specimen A, B and C, with the value of 615, 602 and 277 HV0.5, while that of the substrate was 212 HV0.5. The increase of microhardness, wear and corrosion resistance is highly corelated to microstructure, formed phases, type and content of carbides, micro-hardness and toughness of the alloyed layers.