Scholarlink

<p>Sodium-ion batteries (SIBs) are considered next-generation energy storage devices due to their abundant availability and cost-effectiveness. SIBs serve as a promising alternative to lithium-ion batteries (LIBs). In this study, an effort is made to develop sodium-ion conducting electrolytes using polyacrylonitrile (PAN) as the host polymer and sodium thiocyanate (NaSCN) by the solution casting technique. The prepared sodium-ion conducting membranes are characterized using X-ray diffraction analysis (XRD) to examine their amorphous/crystalline nature. The complex formation between the salt and polymer is confirmed by Fourier transform infrared spectroscopy (FTIR). The sodium-ion conductivity of the prepared membranes is measured using the AC impedance technique. The solid polymer membrane composed of 55 wt.% PAN/45 wt.% NaSCN exhibits a high sodium-ion conductivity of 8.8 × 10<sup>−3</sup> S/cm. This polymer membrane exhibits a low glass transition temperature (<i>T</i><sub><i>g</i></sub>). Linear sweep voltammetry (LSV) and cyclic voltammetry (CV) studies are performed for high-conducting membrane to evaluate their electrochemical stability. A primary solid-state sodium-ion battery is constructed using the high sodium-ion conducting polymer electrolyte which exhibits an open circuit voltage of 2.52&#xa0;V. When a load of 100 kΩ is connected across the battery, a current of 21 µA is drawn. The performance of the primary solid-state SIB is evaluated under various loads.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Fabrication and characterization of polymer electrolyte based on PAN with NaSCN for solid-state sodium-ion batteries

  • 期刊论文

  • 发表日期：

    2025年7月23日

查看全文
  • N. Shamimabanu,
  • S. Selvanayagam,
  • S. Selvasekarapandian,
  • S. Kamatchi Devi,
  • S. Aafrin Hazaana,
  • N. Muniraj Vignesh,
  • N. Usha

摘要

Sodium-ion batteries (SIBs) are considered next-generation energy storage devices due to their abundant availability and cost-effectiveness. SIBs serve as a promising alternative to lithium-ion batteries (LIBs). In this study, an effort is made to develop sodium-ion conducting electrolytes using polyacrylonitrile (PAN) as the host polymer and sodium thiocyanate (NaSCN) by the solution casting technique. The prepared sodium-ion conducting membranes are characterized using X-ray diffraction analysis (XRD) to examine their amorphous/crystalline nature. The complex formation between the salt and polymer is confirmed by Fourier transform infrared spectroscopy (FTIR). The sodium-ion conductivity of the prepared membranes is measured using the AC impedance technique. The solid polymer membrane composed of 55 wt.% PAN/45 wt.% NaSCN exhibits a high sodium-ion conductivity of 8.8 × 10−3 S/cm. This polymer membrane exhibits a low glass transition temperature (Tg). Linear sweep voltammetry (LSV) and cyclic voltammetry (CV) studies are performed for high-conducting membrane to evaluate their electrochemical stability. A primary solid-state sodium-ion battery is constructed using the high sodium-ion conducting polymer electrolyte which exhibits an open circuit voltage of 2.52 V. When a load of 100 kΩ is connected across the battery, a current of 21 µA is drawn. The performance of the primary solid-state SIB is evaluated under various loads.