Scholarlink

<p>In this study, Ti₃CNTₓ MXene nanosheets were synthesized from Ti₃AlCNTₓ MAX phase via two selective Al-etching routes: (i) direct hydrofluoric acid (HF) treatment and (ii) in-situ HF generation using a LiF + HCl mixture. Both approaches were systematically compared to evaluate their effects on structural integrity, surface chemistry, and adsorption performance toward the cationic dye Basic Red 46 (BR 46). Comprehensive physicochemical characterizations—including SEM–EDX, XRD, XPS, Raman spectroscopy, AFM, contact angle analysis, and TGA—confirmed successful Al removal and MXene formation for both methods, with notable differences in surface terminations and layer morphology. Batch adsorption experiments were conducted across a wide range of pH values (2–11), temperatures (25–60&#xa0;°C), contact times (0–90&#xa0;min), adsorbent dosages (0.05–0.40&#xa0;g), and initial dye concentrations (10–50&#xa0;mg/L). The HF-etched Ti₃CNTₓ exhibited rapid adsorption, achieving 99.6% removal at pH 2 within 20&#xa0;min, whereas the LiF + HCl-etched sample demonstrated superior performance at moderate-to-alkaline pH and maintained high efficiency at lower dosages. Langmuir isotherm fitting revealed maximum adsorption capacities of 19.24&#xa0;mg/g (HF route) and 28.01&#xa0;mg/g (LiF + HCl route), supporting monolayer adsorption on homogeneous sites. Temperature-dependent studies further indicated an endothermic and spontaneous adsorption mechanism. Overall, the LiF + HCl route offers a greener and safer alternative to conventional HF etching while delivering competitive adsorption performance, improved structural stability, and faster equilibrium. These findings highlight the potential of sustainably synthesized Ti₃CNTₓ MXenes as high-performance adsorbents for dye-laden industrial wastewater treatment.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Green Chemistry Meets Advanced Materials: Synthesis and Adsorption Performance of Ti3CNTx MXenes for Basic Red 46 Dye Removal

  • 期刊论文

  • 发表日期：

    2025年12月17日

查看全文
  • Ekrem Aydın,
  • Aytekin Çelik,
  • Yusuf Köse,
  • Halil Hasar

摘要

In this study, Ti₃CNTₓ MXene nanosheets were synthesized from Ti₃AlCNTₓ MAX phase via two selective Al-etching routes: (i) direct hydrofluoric acid (HF) treatment and (ii) in-situ HF generation using a LiF + HCl mixture. Both approaches were systematically compared to evaluate their effects on structural integrity, surface chemistry, and adsorption performance toward the cationic dye Basic Red 46 (BR 46). Comprehensive physicochemical characterizations—including SEM–EDX, XRD, XPS, Raman spectroscopy, AFM, contact angle analysis, and TGA—confirmed successful Al removal and MXene formation for both methods, with notable differences in surface terminations and layer morphology. Batch adsorption experiments were conducted across a wide range of pH values (2–11), temperatures (25–60 °C), contact times (0–90 min), adsorbent dosages (0.05–0.40 g), and initial dye concentrations (10–50 mg/L). The HF-etched Ti₃CNTₓ exhibited rapid adsorption, achieving 99.6% removal at pH 2 within 20 min, whereas the LiF + HCl-etched sample demonstrated superior performance at moderate-to-alkaline pH and maintained high efficiency at lower dosages. Langmuir isotherm fitting revealed maximum adsorption capacities of 19.24 mg/g (HF route) and 28.01 mg/g (LiF + HCl route), supporting monolayer adsorption on homogeneous sites. Temperature-dependent studies further indicated an endothermic and spontaneous adsorption mechanism. Overall, the LiF + HCl route offers a greener and safer alternative to conventional HF etching while delivering competitive adsorption performance, improved structural stability, and faster equilibrium. These findings highlight the potential of sustainably synthesized Ti₃CNTₓ MXenes as high-performance adsorbents for dye-laden industrial wastewater treatment.