Scholarlink

<p>In this study, TiO<sub>2</sub>, MoS<sub>2</sub> and TiO<sub>2</sub>/MoS<sub>2</sub> nanomaterials were successfully synthesized by sol–gel method and hydrothermal method using butyl titanate and ammonium molybdate as precursors. In the experiment of photocatalytic degradation of oilfield wastewater, the effects of catalyst dosage, initial pH value, reaction time and other key factors on the photocatalytic activity were systematically investigated. The results show that under the conditions that the capacity of wastewater treatment reaction system is 200&#xa0;mL, the dosage of TiO<sub>2</sub> and TiO<sub>2</sub>/MoS<sub>2</sub> are both 0.8&#xa0;g, the initial pH value is between 3 and 4, and the reaction time is 40&#xa0;min, the removal rates of oil and suspended matter in oilfield wastewater by TiO<sub>2</sub>/MoS<sub>2</sub> can reach 79.4% and 92.7%. This significant improvement is likely due to the synergistic effect of TiO<sub>2</sub>/MoS<sub>2</sub> composites, where the presence of MoS<sub>2</sub> helps to improve light absorption and electron transport efficiency, thereby enhancing photocatalytic performance. The detailed mechanisms in this regard will be further elaborated in subsequent discussions. The innovation of this study lies in the successful synthesis of TiO<sub>2</sub>/MoS<sub>2</sub> composites, and the systematic exploration of its high efficiency and influencing factors in the photocatalytic treatment of oilfield wastewater.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Enhanced photocatalytic treatment of oilfield wastewater using TiO2/MoS2 nanocomposites prepared via sol–gel and hydrothermal methods

  • 期刊论文

  • 发表日期：

    2025年1月3日

查看全文
  • Jianing He,
  • Zhiyong Hu,
  • Xinqi Zhu,
  • Zhihua Liu

摘要

In this study, TiO2, MoS2 and TiO2/MoS2 nanomaterials were successfully synthesized by sol–gel method and hydrothermal method using butyl titanate and ammonium molybdate as precursors. In the experiment of photocatalytic degradation of oilfield wastewater, the effects of catalyst dosage, initial pH value, reaction time and other key factors on the photocatalytic activity were systematically investigated. The results show that under the conditions that the capacity of wastewater treatment reaction system is 200 mL, the dosage of TiO2 and TiO2/MoS2 are both 0.8 g, the initial pH value is between 3 and 4, and the reaction time is 40 min, the removal rates of oil and suspended matter in oilfield wastewater by TiO2/MoS2 can reach 79.4% and 92.7%. This significant improvement is likely due to the synergistic effect of TiO2/MoS2 composites, where the presence of MoS2 helps to improve light absorption and electron transport efficiency, thereby enhancing photocatalytic performance. The detailed mechanisms in this regard will be further elaborated in subsequent discussions. The innovation of this study lies in the successful synthesis of TiO2/MoS2 composites, and the systematic exploration of its high efficiency and influencing factors in the photocatalytic treatment of oilfield wastewater.