Scholarlink

<p>The influence of Mo content on the microstructure, mechanical properties, and high-temperature molten salt corrosion behavior of Ni–Cr–Mo alloys was systematically investigated. After solution treatment, grain refinement was observed with increasing Mo content. Mo-enriched precipitates were observed only in the alloy with&#xa0;26&#xa0;wt.% Mo. After exposure to molten NaCl-KCl salt at 700–900&#xa0;°C, corrosion resistance improved with Mo content up to 24&#xa0;wt.% but deteriorated at 26&#xa0;wt.%. All alloys formed a protective oxide scale that consisted of Cr<sub>2</sub>O<sub>3</sub>, NiO, and NiCr<sub>2</sub>O<sub>4</sub>. However, its integrity progressively degraded with increasing temperature, transitioning from dense and adherent at 700&#xa0;°C to porous and cracked at 900&#xa0;°C. Ni<sub>2</sub>(Cr,Mo) phase precipitation was induced during corrosion, and its volume fraction increased with both Mo content and temperature. These Mo-enriched precipitates and abundant Ni<sub>2</sub>(Cr,Mo) precipitates may disrupt oxide scale continuity and may initiate localized galvanic corrosion. Ni–15Cr–24Mo showed the most balanced performance among the compositions investigated under the present test conditions. These findings provide important experimental data and theoretical reference for the design of corrosion-resistant alloys for high-temperature chloride environments.</p> Graphical Abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Microstructure and High-Temperature Chloride Salt Corrosion Behavior of New Ni–Cr–Mo Alloys

  • 期刊论文

  • 发表日期：

    2026年5月26日

查看全文
  • Shuqi Zhu,
  • Xijie Wu,
  • Ao Liu,
  • Zeyuan Sun,
  • Yinghui Tao,
  • Jie Pan,
  • Jun Li,
  • Xueshan Xiao

摘要

The influence of Mo content on the microstructure, mechanical properties, and high-temperature molten salt corrosion behavior of Ni–Cr–Mo alloys was systematically investigated. After solution treatment, grain refinement was observed with increasing Mo content. Mo-enriched precipitates were observed only in the alloy with 26 wt.% Mo. After exposure to molten NaCl-KCl salt at 700–900 °C, corrosion resistance improved with Mo content up to 24 wt.% but deteriorated at 26 wt.%. All alloys formed a protective oxide scale that consisted of Cr2O3, NiO, and NiCr2O4. However, its integrity progressively degraded with increasing temperature, transitioning from dense and adherent at 700 °C to porous and cracked at 900 °C. Ni2(Cr,Mo) phase precipitation was induced during corrosion, and its volume fraction increased with both Mo content and temperature. These Mo-enriched precipitates and abundant Ni2(Cr,Mo) precipitates may disrupt oxide scale continuity and may initiate localized galvanic corrosion. Ni–15Cr–24Mo showed the most balanced performance among the compositions investigated under the present test conditions. These findings provide important experimental data and theoretical reference for the design of corrosion-resistant alloys for high-temperature chloride environments.

Graphical Abstract