Scholarlink

<p>Melt quenching method followed by one step heat treatment was employed to prepare five glass ceramics of composition 70B<sub>2</sub>O<sub>3</sub>–29 Bi<sub>2</sub>O<sub>3</sub>–(1-x)Cr<sub>2</sub>O<sub>3</sub>: xZnO (where x = 0.00, 0.25, 0.5, 0.75, and 1.00) in mol %. The surface topography, Vicker’s hardness, and luminescence properties of the prepared glasses have been investigated as a function of concentration of ZnO in the composition. Crystal size (thru watershed and threshold models) and roughness parameters of the synthesized glass surfaces were calculated by using Gwyddion software application. Higher number of crystals and lower average crystal size were observed in watershed model and threshold model at x = 0.50&#xa0;mol %. X-ray diffraction analysis confirms the formation of crystalline phases such as Bi<sub>4</sub>B<sub>2</sub>O<sub>9</sub>, Bi<sub>6</sub>B<sub>10</sub>O<sub>24</sub>, ZnB<sub>2</sub>O<sub>4</sub>, ZnB<sub>4</sub>O<sub>7</sub>, ZnBi<sub>2</sub>O<sub>4</sub>, spinel-type ZnCr<sub>2</sub>O<sub>4</sub>, etc. The emission spectra have exhibited two distinct emission bands centered at ≈ 550&#xa0;nm and ≈ 650&#xa0;nm attributed to electronic transitions of Cr<sup>3+</sup> (3d<sup>3</sup>) ions. CIE color coordinates (x, y) place these glass ceramics in the green-yellow region of the visible spectrum. This chromatic positioning suggests that the glass ceramics have potential applications as active laser media or LED sources.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Surface topography and emission properties of Cr3+ ions in zinc–bismuth–borate glass ceramics for solid state lighting applications

  • 期刊论文

  • 发表日期：

    2025年9月16日

查看全文
  • Adepu Navalika,
  • Linganaboina Srinivasa Rao,
  • N. Pothanna,
  • T. S. Krishna Kumar

摘要

Melt quenching method followed by one step heat treatment was employed to prepare five glass ceramics of composition 70B2O3–29 Bi2O3–(1-x)Cr2O3: xZnO (where x = 0.00, 0.25, 0.5, 0.75, and 1.00) in mol %. The surface topography, Vicker’s hardness, and luminescence properties of the prepared glasses have been investigated as a function of concentration of ZnO in the composition. Crystal size (thru watershed and threshold models) and roughness parameters of the synthesized glass surfaces were calculated by using Gwyddion software application. Higher number of crystals and lower average crystal size were observed in watershed model and threshold model at x = 0.50 mol %. X-ray diffraction analysis confirms the formation of crystalline phases such as Bi4B2O9, Bi6B10O24, ZnB2O4, ZnB4O7, ZnBi2O4, spinel-type ZnCr2O4, etc. The emission spectra have exhibited two distinct emission bands centered at ≈ 550 nm and ≈ 650 nm attributed to electronic transitions of Cr3+ (3d3) ions. CIE color coordinates (x, y) place these glass ceramics in the green-yellow region of the visible spectrum. This chromatic positioning suggests that the glass ceramics have potential applications as active laser media or LED sources.