Scholarlink

<p>Resonant waveguide grating (RWG) is one of the important devices in optics. Not only was it used as light dispersion equipment, but also RWG was used to enhance the intensity of the electric field on the surface of the device. Some parameters influence to electric field distribution of RWG such as the refractive index of the layers of RWG, the thickness of the layers, the depth of the grating, the period of the grating, and the wavelength of the incident light. In this work, the thickness of the TiO<sub>2</sub> layer on the surface of the RWG was changed while all of the other parameters were fixed. The distribution of the electric field was calculated and the resonant angle was found at the different thicknesses of the TiO<sub>2</sub> layer. The results show that the optimal thickness of the TiO<sub>2</sub> layer is 50&#xa0;nm at the excitation wavelength of 793&#xa0;nm. Changing the electric field intensity versus TiO<sub>2</sub> thickness will be discussed in detail. The real RWG was fabricated based on the simulation results for the high transmittance at the wavelength of 793&#xa0;nm.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Optimal thickness of TiO2 layer on resonance waveguide grating for maximum of electric field by simulation method in comparison with experiment

  • 期刊论文

  • 发表日期：

    2025年3月19日

查看全文
  • Van Nghia Nguyen

摘要

Resonant waveguide grating (RWG) is one of the important devices in optics. Not only was it used as light dispersion equipment, but also RWG was used to enhance the intensity of the electric field on the surface of the device. Some parameters influence to electric field distribution of RWG such as the refractive index of the layers of RWG, the thickness of the layers, the depth of the grating, the period of the grating, and the wavelength of the incident light. In this work, the thickness of the TiO2 layer on the surface of the RWG was changed while all of the other parameters were fixed. The distribution of the electric field was calculated and the resonant angle was found at the different thicknesses of the TiO2 layer. The results show that the optimal thickness of the TiO2 layer is 50 nm at the excitation wavelength of 793 nm. Changing the electric field intensity versus TiO2 thickness will be discussed in detail. The real RWG was fabricated based on the simulation results for the high transmittance at the wavelength of 793 nm.