Scholarlink

<p>Mg and Cu co-doped ZnO thin films were fabricated on a FTO glass substrate by the electrochemical method at a constant current density of 3.5&#xa0;mA/cm². Mg: Cu: ZnO films with the 3 wt% Mg concentration and varying concentrations of 0, 2, 3, and 4 wt% Cu are designated as ZM3, ZM3C2, ZM3C3, and ZM3C4, respectively. The thin films were subjected to analysis using XRD, SEM, FTIR and UV-vis spectroscopy. The results of the structural and morphological analysis demonstrated that the structural parameters and grain size are dependent on the concentration of dopants. The results of the spectroscopy analysis indicated a reduction in the band gap, from 3.9&#xa0;eV to 3.6&#xa0;eV, as the concentration of Cu in Mg: Cu: ZnO increased from 0 to 4%. The optical parameters of the films were obtained through the utilization of FTIR transmission spectrum data and the application of Kramers–Kronig (K-K) relations. The findings indicated that the ZM3C3 film exhibited the highest energy storage capacity and the lowest energy loss when compared to the other samples.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Influence of Cu content on optical spectra of Cu/Mg co-doped ZnO films by Kramers–Kronig

  • 期刊论文

  • 发表日期：

    2025年1月17日

查看全文
  • Mahsa Fakharpour

摘要

Mg and Cu co-doped ZnO thin films were fabricated on a FTO glass substrate by the electrochemical method at a constant current density of 3.5 mA/cm². Mg: Cu: ZnO films with the 3 wt% Mg concentration and varying concentrations of 0, 2, 3, and 4 wt% Cu are designated as ZM3, ZM3C2, ZM3C3, and ZM3C4, respectively. The thin films were subjected to analysis using XRD, SEM, FTIR and UV-vis spectroscopy. The results of the structural and morphological analysis demonstrated that the structural parameters and grain size are dependent on the concentration of dopants. The results of the spectroscopy analysis indicated a reduction in the band gap, from 3.9 eV to 3.6 eV, as the concentration of Cu in Mg: Cu: ZnO increased from 0 to 4%. The optical parameters of the films were obtained through the utilization of FTIR transmission spectrum data and the application of Kramers–Kronig (K-K) relations. The findings indicated that the ZM3C3 film exhibited the highest energy storage capacity and the lowest energy loss when compared to the other samples.