Scholarlink

<p>The effect of plastic deformation of steel C70D and different modes of spheroidizing annealing after drawing on the mechanical properties and microstructure is studied. The suitability of the wire for certification to meet the special requirements of the user is assessed. After experimental fivefold drawing of the wire with diameter 3.7 mm and processing of the data of the mechanical tests, a reliable linear regression equation is obtained for determining the change in the tensile strength (σ<sub>r</sub>) of the wire as a function of the total reduction, which makes it possible to estimate the hardening factor of the wire material. To reduce the strength of the cold-drawn wire to the demanded values of σ<sub>r</sub> ≤ 650 MPa, the spheroidizing annealing mode is selected to be 710°C for 6 h, which provides the required grade of granular pearlite in the steel structure according to TU 14-178-110–89.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Study of Mechanical Properties and Structure of Steel C70D After Drawing Deformation and Spheroidizing Annealing

  • 期刊论文

  • 发表日期：

    2025年1月1日

查看全文
  • I. D. Pospelov,
  • D. V. Matveeva,
  • A. V. Smirnov

摘要

The effect of plastic deformation of steel C70D and different modes of spheroidizing annealing after drawing on the mechanical properties and microstructure is studied. The suitability of the wire for certification to meet the special requirements of the user is assessed. After experimental fivefold drawing of the wire with diameter 3.7 mm and processing of the data of the mechanical tests, a reliable linear regression equation is obtained for determining the change in the tensile strength (σr) of the wire as a function of the total reduction, which makes it possible to estimate the hardening factor of the wire material. To reduce the strength of the cold-drawn wire to the demanded values of σr ≤ 650 MPa, the spheroidizing annealing mode is selected to be 710°C for 6 h, which provides the required grade of granular pearlite in the steel structure according to TU 14-178-110–89.