Scholarlink

<p>Mechanical properties of steel with a&#xa0;carbon content of 0.56 and 0.81% in tension at 800 and 1100 °C are presented. It is shown that the strength of medium-carbon steel at austenitization temperatures is higher than that of high-carbon steel. The method of computer modeling is used to determine the stress of uniform and localized deformation of austenite steel depending on the carbon content and the test temperature, and on this basis, the obtained experimental results are explained.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

High-temperature strength and plasticity of medium- and high-carbon steels

  • 期刊论文

  • 发表日期：

    2025年7月1日

查看全文
  • W. Hui,
  • A. Yu. Borysenko,
  • Y. S. Klemeshov,
  • G. Yan,
  • M. Yu. Ambrazhey,
  • O. D. Malysh

摘要

Mechanical properties of steel with a carbon content of 0.56 and 0.81% in tension at 800 and 1100 °C are presented. It is shown that the strength of medium-carbon steel at austenitization temperatures is higher than that of high-carbon steel. The method of computer modeling is used to determine the stress of uniform and localized deformation of austenite steel depending on the carbon content and the test temperature, and on this basis, the obtained experimental results are explained.