Scholarlink

<p>In this study, nanocrystallization&#xa0;behavior, thermal stability, mechanical properties, and intermetallics formation of Al<sub>86</sub>Cu<sub>6</sub>Y<sub>6</sub>Co<sub>2</sub>&#xa0;(at.%) as-spun amorphous ribbons were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), field emission scanning electron microscopy (FE-SEM) and microhardness. Kissinger, Ozawa, and Augis- Bennett methods were used to study the kinetics of crystallization. Activation energies for primary crystallization of the amorphous alloy in non-isothermal conditions using these methods (173–178 kJmol<sup>−1</sup>) indicate a relatively high thermal stability. The mean amount of Avrami index (~ 2.1) revealed the first stage reaction is controlled by a 3-D diffusional growth with a reducing nucleation rate. The α-Al nanoparticles and intermetallic phases are embedded evenly into the glassy matrix during the first (623&#xa0;K) and second reactions (723&#xa0;K), respectively. The maximum microhardness of about 310 Hv is achieved in the Al<sub>86</sub>Cu<sub>6</sub>Y<sub>6</sub>Co<sub>2</sub>&#xa0;alloy annealed at 623&#xa0;K due to the enhancement of the solute content and the effect of&#xa0;α-Al nanocrystals.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Investigation on nanocrystallization, thermal stability and hardness of amorphous Al86Cu6Y6Co2 alloy

  • 期刊论文

  • 发表日期：

    2025年1月19日

查看全文
  • M. Salehi,
  • S. G. Shabestari,
  • M. Dadashi

摘要

In this study, nanocrystallization behavior, thermal stability, mechanical properties, and intermetallics formation of Al86Cu6Y6Co2 (at.%) as-spun amorphous ribbons were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), field emission scanning electron microscopy (FE-SEM) and microhardness. Kissinger, Ozawa, and Augis- Bennett methods were used to study the kinetics of crystallization. Activation energies for primary crystallization of the amorphous alloy in non-isothermal conditions using these methods (173–178 kJmol−1) indicate a relatively high thermal stability. The mean amount of Avrami index (~ 2.1) revealed the first stage reaction is controlled by a 3-D diffusional growth with a reducing nucleation rate. The α-Al nanoparticles and intermetallic phases are embedded evenly into the glassy matrix during the first (623 K) and second reactions (723 K), respectively. The maximum microhardness of about 310 Hv is achieved in the Al86Cu6Y6Co2 alloy annealed at 623 K due to the enhancement of the solute content and the effect of α-Al nanocrystals.