Scholarlink

<p>In this work, we present the synthesis of polymethyl methacrylate (PMMA)-zeolite composite membranes for hemodialysis applications, using the non-solvent induced phase separation (NIPS) technique. The thermodynamic behavior of the NIPS process was investigated by measuring the cloud points of the PMMA/DMF/water and PMMAZx /DMF/water ternary systems. Additionally, attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the obtained materials. A staining method was also performed to observe the interaction between the membranes and electrolytes, followed by the measurement of the corresponding electrolyte flux. Subsequently, the membrane surface was modified using the Layer-by-Layer (LbL) assembly technique, with PDADMAC and heparin selected as the two electrolytes. The results demonstrate that PMMA-zeolite membranes exhibit new morphologies and improved properties compared to membranes made from a pure PMMA matrix.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Filler effect on properties of polymethyl methacrylate-based membranes for hemodialysis application

  • 期刊论文

  • 发表日期：

    2025年4月14日

查看全文
  • Adel Ouradi,
  • Nabila Cherifi,
  • Yasmina Afir,
  • Chahinaz Bouta,
  • Rebiha Bencherik,
  • Ahmed Benaboura

摘要

In this work, we present the synthesis of polymethyl methacrylate (PMMA)-zeolite composite membranes for hemodialysis applications, using the non-solvent induced phase separation (NIPS) technique. The thermodynamic behavior of the NIPS process was investigated by measuring the cloud points of the PMMA/DMF/water and PMMAZx /DMF/water ternary systems. Additionally, attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the obtained materials. A staining method was also performed to observe the interaction between the membranes and electrolytes, followed by the measurement of the corresponding electrolyte flux. Subsequently, the membrane surface was modified using the Layer-by-Layer (LbL) assembly technique, with PDADMAC and heparin selected as the two electrolytes. The results demonstrate that PMMA-zeolite membranes exhibit new morphologies and improved properties compared to membranes made from a pure PMMA matrix.