Scholarlink

<p>The increasing presence of micro- and nanoplastics in the environment underscores the need for effective polymer degradation strategies and related analytics. Here we present model studies on the enzymatic degradation of polyester materials relevant for environmental protection and recycling using ATR-FTIR spectroscopy. Thin (45–59&#xa0;nm) and thick (92–113&#xa0;nm) poly(ethyleneterephthalate) (PET) and poly(butyleneterephthalate) (PBT) films were deposited onto silicon (Si) internal reflection elements (IRE) by spin coating or rolling from trifluoroacetic acid (TFA) solutions and annealing at 200&#xa0;°C. Films were exposed to borate buffered solutions of <i>Is</i>PETase at 30&#xa0;°C or LCC-iccg at 30&#xa0;°C and 60&#xa0;°C. In-situ ATR-FTIR spectroscopy was applied to monitor enzymatic degradation of the films on a molecular level complemented by ellipsometry, spectroscopic reflectometry (SR) and scanning force microscopy (SFM). Thin and thick PET and PBT films showed surface integrity in buffer at 30&#xa0;°C, while only PBT and thick PET films remained stable at 60&#xa0;°C. Significantly, diagnostic IR bands of PET showed decreasing intensities after contact with buffered solutions of either <i>Is</i>PETase at 30&#xa0;°C or LCC-iccg at 30&#xa0;°C and 60&#xa0;°C enabling extraction of degradation amplitudes and apparent kinetic constants. Both enzymes showed different degradation kinetics: <i>Is</i>PETase displayed significantly higher amplitude and apparent kinetic constants of PET film degradation at 30&#xa0;°C, whereas LCC-iccg at 60&#xa0;°C on thick PET films exceeded even those for <i>Is</i>PETase at 30&#xa0;°C. PBT films showed no substantial degradation except under LCC-iccg at 60&#xa0;°C where a considerable polymer amount was degraded. Ellipsometry and SR data on enzymatically degraded PET and PBT film were in line with the ATR-FTIR data. SFM images of thin PET films revealed featureless granular morphologies before and a grinded texture of the silicon substrate after <i>Is</i>PETase treatment indicative of increased degradation, whereas, thin PBT films indicated low degradation and conserved fibrillar structures after IsPETase treatment.</p><p>Keywords: enzymatic polymer degradation, PETase, polyester film, poly(ethyleneterephthalate), poly(butyleneterephthalate), in-situATR-FTIR spectroscopy</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Enzymatic Degradation of Thin Polyester Films Studied by In-situ ATR-FTIR Spectroscopy

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年7月11日

查看全文
  • M. Müller,
  • N. Sudarsan,
  • B. Urban,
  • A. Gagsteiger,
  • O. Turak,
  • A. Fery,
  • B. Höcker

摘要

The increasing presence of micro- and nanoplastics in the environment underscores the need for effective polymer degradation strategies and related analytics. Here we present model studies on the enzymatic degradation of polyester materials relevant for environmental protection and recycling using ATR-FTIR spectroscopy. Thin (45–59 nm) and thick (92–113 nm) poly(ethyleneterephthalate) (PET) and poly(butyleneterephthalate) (PBT) films were deposited onto silicon (Si) internal reflection elements (IRE) by spin coating or rolling from trifluoroacetic acid (TFA) solutions and annealing at 200 °C. Films were exposed to borate buffered solutions of IsPETase at 30 °C or LCC-iccg at 30 °C and 60 °C. In-situ ATR-FTIR spectroscopy was applied to monitor enzymatic degradation of the films on a molecular level complemented by ellipsometry, spectroscopic reflectometry (SR) and scanning force microscopy (SFM). Thin and thick PET and PBT films showed surface integrity in buffer at 30 °C, while only PBT and thick PET films remained stable at 60 °C. Significantly, diagnostic IR bands of PET showed decreasing intensities after contact with buffered solutions of either IsPETase at 30 °C or LCC-iccg at 30 °C and 60 °C enabling extraction of degradation amplitudes and apparent kinetic constants. Both enzymes showed different degradation kinetics: IsPETase displayed significantly higher amplitude and apparent kinetic constants of PET film degradation at 30 °C, whereas LCC-iccg at 60 °C on thick PET films exceeded even those for IsPETase at 30 °C. PBT films showed no substantial degradation except under LCC-iccg at 60 °C where a considerable polymer amount was degraded. Ellipsometry and SR data on enzymatically degraded PET and PBT film were in line with the ATR-FTIR data. SFM images of thin PET films revealed featureless granular morphologies before and a grinded texture of the silicon substrate after IsPETase treatment indicative of increased degradation, whereas, thin PBT films indicated low degradation and conserved fibrillar structures after IsPETase treatment.

Keywords: enzymatic polymer degradation, PETase, polyester film, poly(ethyleneterephthalate), poly(butyleneterephthalate), in-situATR-FTIR spectroscopy