Scholarlink

<p>The technique employed to prepare nanostructured powder of La-substituted barium ferrite of W-type, BaCo<sub>2</sub>La<sub>x</sub>Fe<sub>16-x</sub>O<sub>27</sub> (x = 0, 0.1) and BaCo<sub>2</sub>La<sub>0.1</sub>Fe<sub>15.9</sub>O<sub>27</sub>/SiO<sub>2</sub> is sol gel autocombustion in this research study. This study has the objective to observe the influence of SiO<sub>2</sub> and La-substitution on dielectric, magnetic in addition to structural parameters of W-type hexagonal lattice. All the samples sintered at 1000&#xa0;°C have hexagonal crystal structure as observed by X-ray Diffraction patterns, in addition, the diffraction peaks of SiO<sub>2</sub> were not observed due to its amorphous nature. Fourier transform infrared spectroscopy provides indication of co-existence of SiO<sub>2</sub> along with two typical absorption bands for hexa-ferrites. The grain sizes and microstructures of all samples were observed by scanning electron microscopy that have range in nanometers. Vibrating sample magnetometer was used to determine the magnetic parameters including remanence (M<sub>r</sub>), saturation magnetization (M<sub>s</sub>), coercivity (H<sub>c</sub>), anisotropy constant, magnetic moments (n<sub>B</sub>) and anisotropy field. The measured AC susceptibility of hexagonal ferrites was observed to decrease with increasing temperature and shows a minimum value at Curie temperature (T<sub>c</sub>). After substituting lanthanum (La) and adding SiO<sub>2</sub> in the samples, the reduction in T<sub>c</sub> was also observed which might be due to the nonmagnetic nature of these constituents. The values of dielectric constant and dielectric loss were observed to decrease when frequency was increased and increased with increase in temperature following the Maxwell Wagner model. The addition of SiO<sub>2</sub> and La-substitution in hexaferrites increased DC resistivity to make these materials suitable for high frequency microwave devices such as dielectric resonators etc.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Influence of La-Substitution and SiO2 Additives on Structure, Magnetic and High Frequency Dielectric Properties of Co2W Hexagonal Ferrites Synthesized by Sol–Gel Auto-Combustion Method

  • 期刊论文

  • 发表日期：

    2025年2月23日

查看全文
  • Mukhtar Ahmad,
  • Muhammad Iqbal Asif,
  • Nidhal Drissi,
  • Azhar Saleem,
  • Rizwan ul Hassan,
  • M. Musa Saad H.-E

摘要

The technique employed to prepare nanostructured powder of La-substituted barium ferrite of W-type, BaCo2LaxFe16-xO27 (x = 0, 0.1) and BaCo2La0.1Fe15.9O27/SiO2 is sol gel autocombustion in this research study. This study has the objective to observe the influence of SiO2 and La-substitution on dielectric, magnetic in addition to structural parameters of W-type hexagonal lattice. All the samples sintered at 1000 °C have hexagonal crystal structure as observed by X-ray Diffraction patterns, in addition, the diffraction peaks of SiO2 were not observed due to its amorphous nature. Fourier transform infrared spectroscopy provides indication of co-existence of SiO2 along with two typical absorption bands for hexa-ferrites. The grain sizes and microstructures of all samples were observed by scanning electron microscopy that have range in nanometers. Vibrating sample magnetometer was used to determine the magnetic parameters including remanence (Mr), saturation magnetization (Ms), coercivity (Hc), anisotropy constant, magnetic moments (nB) and anisotropy field. The measured AC susceptibility of hexagonal ferrites was observed to decrease with increasing temperature and shows a minimum value at Curie temperature (Tc). After substituting lanthanum (La) and adding SiO2 in the samples, the reduction in Tc was also observed which might be due to the nonmagnetic nature of these constituents. The values of dielectric constant and dielectric loss were observed to decrease when frequency was increased and increased with increase in temperature following the Maxwell Wagner model. The addition of SiO2 and La-substitution in hexaferrites increased DC resistivity to make these materials suitable for high frequency microwave devices such as dielectric resonators etc.