Scholarlink

<p>This paper presents the preparation of ceramics with (Bi<sub>0.4</sub>Ba<sub>0.1</sub>)Na<sub>0.5</sub>TiO<sub>3</sub> via a conventional solid-state reaction method and their sintering at low temperatures of 850, 900, and 950&#xa0;°C for 3&#xa0;h, respectively. Bi<sub>2</sub>O<sub>3</sub> and Na<sub>2</sub>O<sub>3</sub> were used to suppress the volatility of Bi and Na ions during the sintering of (Bi<sub>0.4</sub>Ba<sub>0.1</sub>)Na<sub>0.5</sub>TiO<sub>3</sub> ceramics. X-ray diffraction (XRD), Scanning electron microscope (SEM), and an LCR meter were used to analyze these ceramics' structural, morphological, and dielectric properties. Rhombohedral crystal lattice (with space group R3c) is confirmed by Rietveld’s refinement of the XRD pattern. W–H plots show an increase in crystallite strain from 0.77 × 10<sup>–3</sup> to 1.5 × 10<sup>–3</sup> due to a decrease in average crystallite size from 133.32 to 119.52&#xa0;nm. With an increase in sintering temperature, the grain size increased from 0.55 to 2.30&#xa0;μm on average based on SEM images. Dielectric spectra revealed that the magnitude of the dielectric constant (<i>ε</i>) decreases with frequency increase and is explained by Maxwell–Wagner’s Model. The ferroelectric phase transition temperature is shifted to a higher temperature, which makes the material feasible for energy storage applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Influence of low sintering temperature on the structural, morphological, and dielectric properties of (Bi0.4Ba0.1)Na0.5TiO3 ceramics

  • 期刊论文

  • 发表日期：

    2025年2月26日

查看全文
  • Ayushi Sharma,
  • Manpreet Singh,
  • Kamal Kishore,
  • Dinesh Pathak,
  • Khalid Mujasam Batoo,
  • Taimun Qaisar,
  • Ahmed Ahmed Ibrahim,
  • Deepak Kumar,
  • Kais Iben Nassar,
  • Madan Lal

摘要

This paper presents the preparation of ceramics with (Bi0.4Ba0.1)Na0.5TiO3 via a conventional solid-state reaction method and their sintering at low temperatures of 850, 900, and 950 °C for 3 h, respectively. Bi2O3 and Na2O3 were used to suppress the volatility of Bi and Na ions during the sintering of (Bi0.4Ba0.1)Na0.5TiO3 ceramics. X-ray diffraction (XRD), Scanning electron microscope (SEM), and an LCR meter were used to analyze these ceramics' structural, morphological, and dielectric properties. Rhombohedral crystal lattice (with space group R3c) is confirmed by Rietveld’s refinement of the XRD pattern. W–H plots show an increase in crystallite strain from 0.77 × 10–3 to 1.5 × 10–3 due to a decrease in average crystallite size from 133.32 to 119.52 nm. With an increase in sintering temperature, the grain size increased from 0.55 to 2.30 μm on average based on SEM images. Dielectric spectra revealed that the magnitude of the dielectric constant (ε) decreases with frequency increase and is explained by Maxwell–Wagner’s Model. The ferroelectric phase transition temperature is shifted to a higher temperature, which makes the material feasible for energy storage applications.