Scholarlink

<p>The mechanical and corrosion properties of large Al-Cu-Li alloy components are inextricably related to quench sensitivity. This work employed the immersion end quenching technique and multi-scale characterization methods to investigate the quench sensitivity of mechanical and corrosion properties in a 2050 aluminum alloy. The results indicate that reducing the quench rate from 395 to 4&#xa0;K/s leads to an 18.8% decline in the alloy’s ultimate tensile strength (UTS) and a 27.9% reduction in its yield strength (YS); intergranular corrosion (IGC) rating improves from 3 to 2, the maximum IGC depth decreases from 245 to 170&#xa0;μm, and the corrosion current density decreases from 2.66 × 10<sup>−6</sup> to 2.64 × 10<sup>−7</sup> A/cm<sup>2</sup>. Lower quench rates promote the formation of significant amounts of quench induced precipitations in both grains and grain boundaries (GBs). Excessive consumption of Cu atoms in the matrix results in a reduction in the quantity of the aging hardening phase (T<sub>1</sub>) during artificial aging, thereby degrading the mechanical properties. Meanwhile, some larger quench induced precipitations (<i>θ</i>) with more Cu content are precipitated at the recrystallization grain boundaries. These hinder the corrosion path from expanding, which improves the alloy’s corrosion resistance. This study provides theoretical insights into the influence of quench induced precipitations on the properties of Al-Cu-Li alloy and offers valuable guidance for industrial processing.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Investigation of quench sensitivity of mechanical and corrosion properties in 2050 aluminum alloy

  • 期刊论文

  • 发表日期：

    2025年10月3日

查看全文
  • Dingyao Fu,
  • Chengbo Li,
  • Cai Zhao,
  • Xuejun Zheng,
  • Tie Yi,
  • Shusheng Lin,
  • Puli Cao

摘要

The mechanical and corrosion properties of large Al-Cu-Li alloy components are inextricably related to quench sensitivity. This work employed the immersion end quenching technique and multi-scale characterization methods to investigate the quench sensitivity of mechanical and corrosion properties in a 2050 aluminum alloy. The results indicate that reducing the quench rate from 395 to 4 K/s leads to an 18.8% decline in the alloy’s ultimate tensile strength (UTS) and a 27.9% reduction in its yield strength (YS); intergranular corrosion (IGC) rating improves from 3 to 2, the maximum IGC depth decreases from 245 to 170 μm, and the corrosion current density decreases from 2.66 × 10−6 to 2.64 × 10−7 A/cm2. Lower quench rates promote the formation of significant amounts of quench induced precipitations in both grains and grain boundaries (GBs). Excessive consumption of Cu atoms in the matrix results in a reduction in the quantity of the aging hardening phase (T1) during artificial aging, thereby degrading the mechanical properties. Meanwhile, some larger quench induced precipitations (θ) with more Cu content are precipitated at the recrystallization grain boundaries. These hinder the corrosion path from expanding, which improves the alloy’s corrosion resistance. This study provides theoretical insights into the influence of quench induced precipitations on the properties of Al-Cu-Li alloy and offers valuable guidance for industrial processing.