<p>Flexible CoFe<sub>2</sub>O<sub>4</sub>/polyvinylidene fluoride (CFO/PVDF) composite films were fabricated via a casting technique using CFO particles synthesized hydrothermally with varying holding times. The effects of CFO particle size on phase composition, microstructure, mechanical behavior, and magnetoelectric properties of the films were systematically investigated. The CFO particles were uniformly dispersed within the PVDF matrix. As particle size increased, the composite surface became smoother and more continuous. With a 2&#xa0;h holding time, corresponding to a CFO size of 7.48 × 0.59&#xa0;μm, the film exhibited the highest magnetodielectric coefficient (5.22%) and a magnetoelectric coupling coefficient of − 8.98&#xa0;V/(cm&#xa0;Oe). In contrast, CFO/PVDF-1&#xa0;h films, containing CFO particles sized 5.37 × 0.50&#xa0;μm, achieved maximum tensile strength (497.39&#xa0;N/mm<sup>2</sup>) and elongation at break (23.40%), indicating superior mechanical performance. These findings highlight the critical role of CFO particle size in tuning the functional properties of the composite films. The CFO/PVDF composites demonstrate both enhanced magnetoelectric coupling and mechanical robustness, suggesting their potential for application in flexible electronics and multifunctional sensing devices.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Improvement of magnetoelectric properties of 1-3-type PVDF-based flexible composite films based on size effect

  • Shiqi Chen,
  • Weihao Wu,
  • Guiyun Sun,
  • Xiaoling Deng,
  • Rongli Gao,
  • Gang Meng,
  • Wei Cai,
  • Chunlin Fu

摘要

Flexible CoFe2O4/polyvinylidene fluoride (CFO/PVDF) composite films were fabricated via a casting technique using CFO particles synthesized hydrothermally with varying holding times. The effects of CFO particle size on phase composition, microstructure, mechanical behavior, and magnetoelectric properties of the films were systematically investigated. The CFO particles were uniformly dispersed within the PVDF matrix. As particle size increased, the composite surface became smoother and more continuous. With a 2 h holding time, corresponding to a CFO size of 7.48 × 0.59 μm, the film exhibited the highest magnetodielectric coefficient (5.22%) and a magnetoelectric coupling coefficient of − 8.98 V/(cm Oe). In contrast, CFO/PVDF-1 h films, containing CFO particles sized 5.37 × 0.50 μm, achieved maximum tensile strength (497.39 N/mm2) and elongation at break (23.40%), indicating superior mechanical performance. These findings highlight the critical role of CFO particle size in tuning the functional properties of the composite films. The CFO/PVDF composites demonstrate both enhanced magnetoelectric coupling and mechanical robustness, suggesting their potential for application in flexible electronics and multifunctional sensing devices.