Scholarlink

<p>The versatility of organic photodetectors (OPDs) is evident from their flexible structures and impressive performance metrics. These materials are positioned to transform optoelectronics by enabling the manufacturing of high-performance devices using cost-effective processes. This study explored the addition of single-walled carbon nanotubes (SWCNTs) to PBDB-T:ITIC-based OPDs using numerical analysis with SCAPS 1D software. The optimized modeled structure PFN:Br/SWCNT/PBDB-T:ITIC/Spiro-MeOTAD/Cu yielded a responsivity of 0.2308 A/W and a detectivity of 8.8 × 10<sup>13</sup> Jones. The combination of SWCNTs with the PBDB-T:ITIC matrix significantly improved the short-circuit current density (Jsc) to 23.68 mA/cm<sup>2</sup> and open-circuit voltage (Voc) to 0.73 V. The structured OPD achieved a fill factor (FF) of 75.88% at a thickness of 200 nm for the photosensitive layer. The study also examined the impact of environmental factors, such as temperature and light intensity, and the effect of series and shunt resistance on the device output parameters. Optimal performance was observed under 1 sun illumination at room temperature (300 K), where a low series resistance (1 Ω&#xa0;cm<sup>2</sup>) and high shunt resistance (1000 Ω&#xa0;cm<sup>2</sup>) were crucial for achieving exceptional device metrics. The built-in potential (Vbi) and doping density (Nd), determined through C-V measurements, were 0.74 V and 3.24 × 10<sup>1</sup>⁷ cm⁻<sup>3</sup>, respectively. The Nyquist plots of the optimized structure display a semicircular shape, indicating reduced recombination rates and enhanced efficiency. These findings highlight the potential of SWCNT integration for enhancing the performance and stability of OPDs, particularly in visible-range applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Optimization and performance enhancement in PBDB-T:ITIC-based organic photodetector via SWCNT integration

  • 期刊论文

  • 发表日期：

    2025年5月12日

查看全文
  • Ghazi Aman Nowsherwan,
  • Umar Farooq Ali,
  • Aurang Zaib,
  • Mohsin Khan,
  • Qasim Ali,
  • Nouman Nowsherwan,
  • Saira Ikram

摘要

The versatility of organic photodetectors (OPDs) is evident from their flexible structures and impressive performance metrics. These materials are positioned to transform optoelectronics by enabling the manufacturing of high-performance devices using cost-effective processes. This study explored the addition of single-walled carbon nanotubes (SWCNTs) to PBDB-T:ITIC-based OPDs using numerical analysis with SCAPS 1D software. The optimized modeled structure PFN:Br/SWCNT/PBDB-T:ITIC/Spiro-MeOTAD/Cu yielded a responsivity of 0.2308 A/W and a detectivity of 8.8 × 1013 Jones. The combination of SWCNTs with the PBDB-T:ITIC matrix significantly improved the short-circuit current density (Jsc) to 23.68 mA/cm2 and open-circuit voltage (Voc) to 0.73 V. The structured OPD achieved a fill factor (FF) of 75.88% at a thickness of 200 nm for the photosensitive layer. The study also examined the impact of environmental factors, such as temperature and light intensity, and the effect of series and shunt resistance on the device output parameters. Optimal performance was observed under 1 sun illumination at room temperature (300 K), where a low series resistance (1 Ω cm2) and high shunt resistance (1000 Ω cm2) were crucial for achieving exceptional device metrics. The built-in potential (Vbi) and doping density (Nd), determined through C-V measurements, were 0.74 V and 3.24 × 101⁷ cm⁻3, respectively. The Nyquist plots of the optimized structure display a semicircular shape, indicating reduced recombination rates and enhanced efficiency. These findings highlight the potential of SWCNT integration for enhancing the performance and stability of OPDs, particularly in visible-range applications.