Scholarlink

<p>The vacuum thermal evaporation method was used to produce Sb<sub>2</sub>(S<sub><i>x</i></sub>Se<sub>1–<i>x</i></sub>)<sub>3</sub> films from powders of precursor binary compounds, Sb<sub>2</sub>S<sub>3</sub> and Sb<sub>2</sub>Se<sub>3</sub>, at substrate temperature 300°C. The effect of the elemental composition ratio S/(S + Se) on the optical and electrical properties of Sb<sub>2</sub>(S<sub><i>x</i></sub>Se<sub>1–<i>x</i></sub>)<sub>3</sub> films was studied. The band gap width of Sb<sub>2</sub>(S<sub><i>x</i></sub>Se<sub>1–<i>x</i></sub>) films increases with an increase in the sulfur concentration. The prepared films feature low Urbach energies indicating low-defect structure. The temperature dependence of the resistance indicated the presence of deep-lying levels in the range 0.5–0.8 eV depending of the S/(S+Se) atomic concentration ratio. These results indicate the feasibility of producing effective solar cells containing Sb<sub>2</sub>(S<i>x</i>Sb<sub>1–<i>x</i></sub>)<sub>3</sub> obtained by means of thermal evaporation of powders of Sb<sub>2</sub>S<sub>3</sub> and Sb<sub>2</sub>Se<sub>3</sub>.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Optical and Electrical Properties of Sb2(SxSe1–x)3 Films for Solar Cells

  • 期刊论文

  • 发表日期：

    2025年1月11日

查看全文
  • M. S. Tivanov,
  • T. M. Razykov,
  • K. M. Kuchkarov,
  • L. S. Lyashenko,
  • E. S. Voropay,
  • Sh.B. Utamurodova,
  • D. Z. Isakov,
  • M. A. Makhmudov,
  • A. N. Olimov,
  • S. A. Muzafarova,
  • D. S. Bayko

摘要

The vacuum thermal evaporation method was used to produce Sb2(SxSe1–x)3 films from powders of precursor binary compounds, Sb2S3 and Sb2Se3, at substrate temperature 300°C. The effect of the elemental composition ratio S/(S + Se) on the optical and electrical properties of Sb2(SxSe1–x)3 films was studied. The band gap width of Sb2(SxSe1–x) films increases with an increase in the sulfur concentration. The prepared films feature low Urbach energies indicating low-defect structure. The temperature dependence of the resistance indicated the presence of deep-lying levels in the range 0.5–0.8 eV depending of the S/(S+Se) atomic concentration ratio. These results indicate the feasibility of producing effective solar cells containing Sb2(SxSb1–x)3 obtained by means of thermal evaporation of powders of Sb2S3 and Sb2Se3.