Scholarlink

<p>In this article, we analyze the process of obtaining VK94-1 ceramics modified with zirconium dioxide ZrO<sub>2</sub> and determine its properties, such as apparent density, mechanical bending strength, and Vickers hardness (microhardness) in comparison with those of VK94-1 ceramics. The effect of changes in the share of zirconium dioxide in the samples on the above properties is shown. The influence of firing temperatures on the sintering of samples is studied. Samples with different component ratios of VK94-1/ZrO<sub>2</sub> (90/10, 80/20, and 70/30) were pressed using an isostatic pressing machine at a pressure of 150 MPa. Firing was carried out at different temperatures of 1500, 1550, and 1600°C in different firing media.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Vacuum-Tight Corundum Ceramics VK94-1 Modified with Zirconium Dioxide

  • 期刊论文

  • 发表日期：

    2025年9月11日

查看全文
  • A. A. Sokolin,
  • N. A. Makarov

摘要

In this article, we analyze the process of obtaining VK94-1 ceramics modified with zirconium dioxide ZrO2 and determine its properties, such as apparent density, mechanical bending strength, and Vickers hardness (microhardness) in comparison with those of VK94-1 ceramics. The effect of changes in the share of zirconium dioxide in the samples on the above properties is shown. The influence of firing temperatures on the sintering of samples is studied. Samples with different component ratios of VK94-1/ZrO2 (90/10, 80/20, and 70/30) were pressed using an isostatic pressing machine at a pressure of 150 MPa. Firing was carried out at different temperatures of 1500, 1550, and 1600°C in different firing media.