<p>The evolution of bed shear stress in open-channel flow due to a sudden change in bed roughness was investigated experimentally for rough-to-smooth (RTS) and smooth-to-rough (STR) transitions. The velocity field was measured in the longitudinal-vertical plane from upstream to downstream using a Particle Image Velocimetry system. The bed shear stress was determined from the measured velocity profile and water depth using various methods. It was found that the variation of bed shear stress in gradually varied flow through a roughness transition was influenced by both flow depth and bottom roughness. In both RTS and STR transitions, the bed shear stress adjusted to the new bed condition almost immediately even though the velocity profile away from the bed was still evolving, but unlike external and close-conduit flows the bed shear stress in open-channel flows continued to evolve until the flow depth was uniform. It is shown that the evolution of bed shear stress in a STR transition is dependent on the choice of the displacement height on the rough bed, which affects the mixing length used to derive the logarithmic velocity profile and equivalent roughness. Bed shear stress variation consistent with published data was obtained when the <InlineEquation ID="IEq1"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10652_2025_10024_Article_IEq1.gif" Format="GIF" Height="19" Rendition="HTML" Resolution="72" Type="Linedraw" Width="45" /> </InlineMediaObject> <EquationSource Format="TEX">\({k}_{s}/{d}_{90}\)</EquationSource> <EquationSource Format="MATHML"><math> <mrow> <msub> <mi>k</mi> <mi>s</mi> </msub> <mo stretchy="false">/</mo> <msub> <mi>d</mi> <mn>90</mn> </msub> </mrow> </math></EquationSource> </InlineEquation> ratio was determined as a function of the <InlineEquation ID="IEq2"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10652_2025_10024_Article_IEq2.gif" Format="GIF" Height="19" Rendition="HTML" Resolution="72" Type="Linedraw" Width="40" /> </InlineMediaObject> <EquationSource Format="TEX">\(h/{d}_{90}\)</EquationSource> <EquationSource Format="MATHML"><math> <mrow> <mi>h</mi> <mo stretchy="false">/</mo> <msub> <mi>d</mi> <mn>90</mn> </msub> </mrow> </math></EquationSource> </InlineEquation> ratio, where <InlineEquation ID="IEq3"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10652_2025_10024_Article_IEq3.gif" Format="GIF" Height="16" Rendition="HTML" Resolution="72" Type="Linedraw" Width="17" /> </InlineMediaObject> <EquationSource Format="TEX">\({k}_{s}\)</EquationSource> <EquationSource Format="MATHML"><math> <msub> <mi>k</mi> <mi>s</mi> </msub> </math></EquationSource> </InlineEquation> is the equivalent roughness height, <InlineEquation ID="IEq4"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10652_2025_10024_Article_IEq4.gif" Format="GIF" Height="14" Rendition="HTML" Resolution="72" Type="Linedraw" Width="14" /> </InlineMediaObject> <EquationSource Format="TEX">\(h\)</EquationSource> <EquationSource Format="MATHML"><math> <mi>h</mi> </math></EquationSource> </InlineEquation> is the flow depth, and <InlineEquation ID="IEq5"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10652_2025_10024_Article_IEq5.gif" Format="GIF" Height="16" Rendition="HTML" Resolution="72" Type="Linedraw" Width="22" /> </InlineMediaObject> <EquationSource Format="TEX">\({d}_{90}\)</EquationSource> <EquationSource Format="MATHML"><math> <msub> <mi>d</mi> <mn>90</mn> </msub> </math></EquationSource> </InlineEquation> is the grain diameter with 90% of finer particles.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Laboratory study of bed shear stress in gradually varied flow over a sudden change in bed roughness

  • Muhammad Farrukh Jamil,
  • Francis C. K. Ting,
  • Monika Kafle

摘要

The evolution of bed shear stress in open-channel flow due to a sudden change in bed roughness was investigated experimentally for rough-to-smooth (RTS) and smooth-to-rough (STR) transitions. The velocity field was measured in the longitudinal-vertical plane from upstream to downstream using a Particle Image Velocimetry system. The bed shear stress was determined from the measured velocity profile and water depth using various methods. It was found that the variation of bed shear stress in gradually varied flow through a roughness transition was influenced by both flow depth and bottom roughness. In both RTS and STR transitions, the bed shear stress adjusted to the new bed condition almost immediately even though the velocity profile away from the bed was still evolving, but unlike external and close-conduit flows the bed shear stress in open-channel flows continued to evolve until the flow depth was uniform. It is shown that the evolution of bed shear stress in a STR transition is dependent on the choice of the displacement height on the rough bed, which affects the mixing length used to derive the logarithmic velocity profile and equivalent roughness. Bed shear stress variation consistent with published data was obtained when the \({k}_{s}/{d}_{90}\) k s / d 90 ratio was determined as a function of the \(h/{d}_{90}\) h / d 90 ratio, where \({k}_{s}\) k s is the equivalent roughness height, \(h\) h is the flow depth, and \({d}_{90}\) d 90 is the grain diameter with 90% of finer particles.