Scholarlink

<p>Bacterial cellulose (BC) has gained significant interest for various applications due to its useful properties which include chemical stability and strong physical properties as well as its biocompatibility. However, conventional fabrication methods are limited by a lack of control over the form, particularly depth and thickness, restricting BC applications to 2D planar shapes. The production of BC is constrained by the formation of a pellicle at the liquid–air interface. To overcome this constraint and enable continuous pellicle formation, a method was established to combine intermittent batch feeding with a supportive mesh scaffold. Intermittent feeding supplies nutrients to the pellicle, promoting sustained formation at the liquid–air interface, while the supporting mesh anchors the initial pellicle to prevent submersion. This approach facilitates the continuous growth of BC pellicle at a controlled rate. Moreover, the method described here results in a single BC pellicle with enhanced thickness, weight (both wet and dry states), water-holding capacity and mechanical strength. Continuous growth is achievable with ongoing nutrient supply, allowing for precise control over the final pellicle thickness. This culturing method is scalable and has been tested for volumes ranging from 250&#xa0;mL to 10&#xa0;L, and significantly increases glucose-to-cellulose conversion (3.4-fold) and water utilization efficiency (2.4-fold).</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Enhanced production of bacterial cellulose with a mesh dispenser vessel-based bioreactor

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年1月29日

查看全文
  • Joshua Loh,
  • Thora Arnardottir,
  • Katie Gilmour,
  • Meng Zhang,
  • Martyn Dade-Robertson

摘要

Bacterial cellulose (BC) has gained significant interest for various applications due to its useful properties which include chemical stability and strong physical properties as well as its biocompatibility. However, conventional fabrication methods are limited by a lack of control over the form, particularly depth and thickness, restricting BC applications to 2D planar shapes. The production of BC is constrained by the formation of a pellicle at the liquid–air interface. To overcome this constraint and enable continuous pellicle formation, a method was established to combine intermittent batch feeding with a supportive mesh scaffold. Intermittent feeding supplies nutrients to the pellicle, promoting sustained formation at the liquid–air interface, while the supporting mesh anchors the initial pellicle to prevent submersion. This approach facilitates the continuous growth of BC pellicle at a controlled rate. Moreover, the method described here results in a single BC pellicle with enhanced thickness, weight (both wet and dry states), water-holding capacity and mechanical strength. Continuous growth is achievable with ongoing nutrient supply, allowing for precise control over the final pellicle thickness. This culturing method is scalable and has been tested for volumes ranging from 250 mL to 10 L, and significantly increases glucose-to-cellulose conversion (3.4-fold) and water utilization efficiency (2.4-fold).