<p>This paper proposes a compact Multiple Input Multiple Output (MIMO) antenna with frequency reconfigurability for Wi-Fi and fixed satellite applications. Utilizing two PIN diodes, the antenna can switch between (2.14<InlineEquation ID="IEq1"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10470_2025_2358_Article_IEq1.gif" Format="GIF" Height="13" Rendition="HTML" Resolution="72" Type="Linedraw" Width="19" /> </InlineMediaObject> <EquationSource Format="TEX">\(-\)</EquationSource> <EquationSource Format="MATHML"><math> <mo>-</mo> </math></EquationSource> </InlineEquation>&#xa0;2.98) GHz and (6.66&#xa0;<InlineEquation ID="IEq2"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10470_2025_2358_Article_IEq2.gif" Format="GIF" Height="13" Rendition="HTML" Resolution="72" Type="Linedraw" Width="19" /> </InlineMediaObject> <EquationSource Format="TEX">\(-\)</EquationSource> <EquationSource Format="MATHML"><math> <mo>-</mo> </math></EquationSource> </InlineEquation>&#xa0;7.16) GHz electronically. An inverted F-shaped defective ground arrangement ensures excellent isolation between the rectangular antenna elements. Constructed with a low-cost FR4 substrate, the antenna exhibits isolation greater than 25 dB and ECC less than 0.08 over the two frequency bands. At 2.45 GHz and 6.91 GHz, the transducer’s peak realized gains are 4.68 dBi and 4.27 dBi, respectively. The Mean Effective Gain (MEG) and measured Envelope Correlation Coefficient (ECC) make it suitable for MIMO antenna systems. The fabricated prototype validates the proposed concept, with simulation findings closely aligning with measurement results.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

A compact frequency reconfigurable MIMO antenna with high isolation for Wi-Fi and fixed satellite applications

  • B. Ramamohan,
  • M. Siva Ganga Prasad

摘要

This paper proposes a compact Multiple Input Multiple Output (MIMO) antenna with frequency reconfigurability for Wi-Fi and fixed satellite applications. Utilizing two PIN diodes, the antenna can switch between (2.14 \(-\) -  2.98) GHz and (6.66  \(-\) -  7.16) GHz electronically. An inverted F-shaped defective ground arrangement ensures excellent isolation between the rectangular antenna elements. Constructed with a low-cost FR4 substrate, the antenna exhibits isolation greater than 25 dB and ECC less than 0.08 over the two frequency bands. At 2.45 GHz and 6.91 GHz, the transducer’s peak realized gains are 4.68 dBi and 4.27 dBi, respectively. The Mean Effective Gain (MEG) and measured Envelope Correlation Coefficient (ECC) make it suitable for MIMO antenna systems. The fabricated prototype validates the proposed concept, with simulation findings closely aligning with measurement results.