Scholarlink

Objective <p>Stereotactic procedures are planned and performed with straight trajectories. However, brain sulci with vessels and ventricles have to be avoided for bleeding and deviation risks. In distinct pathologies such as insular or pineal lesions, or in patients with brain atrophy, curved trajectories theoratically could provide superior results. So far, research on curved trajectories for stereotactic neurosurgery focusses on aspects like path planning, robot design and control. In a collaborative project of engineers, mathematicians, and neurosurgeons a prototype system for curved cannulas was developed using a concentric tube continuum robot (CTCR) platform.</p> Methods <p>Target precision and follow-the-leader-deviations by movements of the cannulas were assessed. For a set of automatically planned configurations by numerical optimization, the real robot behavior was compared to state-of-the-art models of elastostatic behavior. Target accuracy was tested with CT-imaging of a head model and a deep-seated target, calculation and transformation of stereotactic coordinates to the actuation system, and application of the curved cannulas to the target.</p> Results <p>Determination of the model’s target point via CT-scan and transformation of the stereotactic coordinates in the path planning software for curved trajectories were possible. The technical operation of the prototype was improved for mounting at the stereotactic system. The target could be calculated with optimal accuracy in the panned configuration by numerical optimization and the test procedure could be performed successfully. However, accuracy with curved cannulas in this prototype system had a target point deviation of 2&#xa0;mm and more.</p> Conclusions <p>To the authors’ knowledge, this is the first application of curved cannulas for stereotactic neurosurgery in a comparable way to clinical practice. Further research will have to address incorporating iterative learning control of the robot’s tip position to reach target point deviations below 1&#xa0;mm.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Curved trajectories in stereotactic neurosurgery: is it feasible?

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年12月18日

查看全文
  • Dörthe Keiner,
  • Julian Mühlenhoff,
  • Mohamed Henia,
  • Fabian Rabel,
  • Wolfgang Reith,
  • Matthias K. Hoffmann,
  • Kathrin Flaßkamp,
  • Karl Worthmann,
  • Thomas Sattel,
  • Joachim Oertel

摘要

Objective

Stereotactic procedures are planned and performed with straight trajectories. However, brain sulci with vessels and ventricles have to be avoided for bleeding and deviation risks. In distinct pathologies such as insular or pineal lesions, or in patients with brain atrophy, curved trajectories theoratically could provide superior results. So far, research on curved trajectories for stereotactic neurosurgery focusses on aspects like path planning, robot design and control. In a collaborative project of engineers, mathematicians, and neurosurgeons a prototype system for curved cannulas was developed using a concentric tube continuum robot (CTCR) platform.

Methods

Target precision and follow-the-leader-deviations by movements of the cannulas were assessed. For a set of automatically planned configurations by numerical optimization, the real robot behavior was compared to state-of-the-art models of elastostatic behavior. Target accuracy was tested with CT-imaging of a head model and a deep-seated target, calculation and transformation of stereotactic coordinates to the actuation system, and application of the curved cannulas to the target.

Results

Determination of the model’s target point via CT-scan and transformation of the stereotactic coordinates in the path planning software for curved trajectories were possible. The technical operation of the prototype was improved for mounting at the stereotactic system. The target could be calculated with optimal accuracy in the panned configuration by numerical optimization and the test procedure could be performed successfully. However, accuracy with curved cannulas in this prototype system had a target point deviation of 2 mm and more.

Conclusions

To the authors’ knowledge, this is the first application of curved cannulas for stereotactic neurosurgery in a comparable way to clinical practice. Further research will have to address incorporating iterative learning control of the robot’s tip position to reach target point deviations below 1 mm.