Scholarlink

<p>A modified screen-printed carbon electrode (SPCE) has been developed for the determination of bisphenol A (BPA), a compound widely used in plastics and resins production, which can disrupt endocrine and reproductive human systems. Magnetic graphene oxide (MGO) was synthesized following a sustainable protocol based on mechanochemistry. Then, MGO was combined with a molecularly imprinted pyrrole-based polymer (MIPPy) for the preparation of a novel magnetic nanocomposite (BPA@MIPPy), characterized by several imaging, spectroscopic, and electrochemical techniques. The magnetic properties of BPA@MIPPy allowed the manipulation of the material, including separation, analyte preconcentration, and electrode modification. Differential pulse voltammetry (DVP) was the selected electrochemical technique for BPA detection, presenting high sensitivity (LOD = 29&#xa0;nM, LOQ = 97&#xa0;nM) and precision under optimum conditions. To study selectivity, the response of the sensor toward four potential interferents was evaluated (phenol, methanol, sodium nitrate, and ascorbic acid), and no interference was observed. Finally, a real wastewater sample was successfully analyzed, demonstrating that the method is adequate for water-control applications.</p> Graphical Abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Selective electrochemical sensor for bisphenol A detection in wastewater using molecularly imprinted polymers on sustainable magnetic graphene oxide

  • 期刊论文

  • 发表日期：

    2025年10月10日

查看全文
  • Pablo Montoro-Leal,
  • Maria del Mar Lopez Guerrero,
  • Lourdes Mena-Herrera,
  • Elisa Vereda Alonso,
  • Antonio J. Ruiz-Sánchez,
  • Rebeca Jiménez-Pérez

摘要

A modified screen-printed carbon electrode (SPCE) has been developed for the determination of bisphenol A (BPA), a compound widely used in plastics and resins production, which can disrupt endocrine and reproductive human systems. Magnetic graphene oxide (MGO) was synthesized following a sustainable protocol based on mechanochemistry. Then, MGO was combined with a molecularly imprinted pyrrole-based polymer (MIPPy) for the preparation of a novel magnetic nanocomposite (BPA@MIPPy), characterized by several imaging, spectroscopic, and electrochemical techniques. The magnetic properties of BPA@MIPPy allowed the manipulation of the material, including separation, analyte preconcentration, and electrode modification. Differential pulse voltammetry (DVP) was the selected electrochemical technique for BPA detection, presenting high sensitivity (LOD = 29 nM, LOQ = 97 nM) and precision under optimum conditions. To study selectivity, the response of the sensor toward four potential interferents was evaluated (phenol, methanol, sodium nitrate, and ascorbic acid), and no interference was observed. Finally, a real wastewater sample was successfully analyzed, demonstrating that the method is adequate for water-control applications.

Graphical Abstract