Scholarlink

<p>Thermal stress can trigger slip in rock fractures. Understanding this thermally induced slip behavior of fractures in crystalline rock is crucial for the design and operation of enhanced geothermal systems, and deep geological repository. The present study aims to investigate mechanism and mechanical response of thermal-induced slip in a single fracture. We develop a FEM-based model to simulate the thermally induced slip in fractures with different surface roughness, and under different boundary conditions. The model is validated against a unique set of thermally induced slip test data in laboratory. The results show that thermal stress can cause a decrease in normal stress on the fracture surface, accompanied by an increase in shear stress. The mechanical boundary conditions and fracture roughness can significantly influence the fracture aperture evolution during the slip process. Specifically, results show that increasing the vertical stress can induce a transition from fracture closure to dilation (3.8% closure at <InlineEquation ID="IEq1"> <EquationSource Format="TEX">\({\sigma }_{z}\)</EquationSource> <EquationSource Format="MATHML"><math> <msub> <mi>σ</mi> <mi>z</mi> </msub> </math></EquationSource> </InlineEquation>= 1 MPa versus 23.7% aperture increase at <InlineEquation ID="IEq2"> <EquationSource Format="TEX">\({\sigma }_{z}\)</EquationSource> <EquationSource Format="MATHML"><math> <msub> <mi>σ</mi> <mi>z</mi> </msub> </math></EquationSource> </InlineEquation>= 50 MPa), while a higher normal stiffness suppresses slip and limits aperture changes. Additionally, rougher fractures exhibit greater closure (the roughest fracture exhibits 3.8% closure vs 1.0% for the smoothest), and neglecting fracture surface plasticity leads to an underestimation of fracture closure in the slip process.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Numerical Analysis of Cooling-Induced Slip in Crystalline Rock Fractures: Influence of Boundary Conditions and Surface Roughness

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年8月5日

查看全文
  • Yunzhe Jin,
  • Liangchao Zou,
  • Li Zhuang,
  • Changlun Sun,
  • Zhihong Zhao,
  • Chi Yao,
  • Chuangbing Zhou,
  • Vladimir Cvetkovic

摘要

Thermal stress can trigger slip in rock fractures. Understanding this thermally induced slip behavior of fractures in crystalline rock is crucial for the design and operation of enhanced geothermal systems, and deep geological repository. The present study aims to investigate mechanism and mechanical response of thermal-induced slip in a single fracture. We develop a FEM-based model to simulate the thermally induced slip in fractures with different surface roughness, and under different boundary conditions. The model is validated against a unique set of thermally induced slip test data in laboratory. The results show that thermal stress can cause a decrease in normal stress on the fracture surface, accompanied by an increase in shear stress. The mechanical boundary conditions and fracture roughness can significantly influence the fracture aperture evolution during the slip process. Specifically, results show that increasing the vertical stress can induce a transition from fracture closure to dilation (3.8% closure at \({\sigma }_{z}\) σ z = 1 MPa versus 23.7% aperture increase at \({\sigma }_{z}\) σ z = 50 MPa), while a higher normal stiffness suppresses slip and limits aperture changes. Additionally, rougher fractures exhibit greater closure (the roughest fracture exhibits 3.8% closure vs 1.0% for the smoothest), and neglecting fracture surface plasticity leads to an underestimation of fracture closure in the slip process.