Scholarlink

<p>The advantages of the laser beam powder bed fusion process for metals (PBF-LB/M), such as geometric complexity due to increased design freedom or function integration, offer a&#xa0;great potential for optimizing products in the automotive sector. However, it often does not go beyond prototyping and small series as productivity is too low for the required quantities and economies of scale can rarely be exploited lucratively. In the field of e‑mobility, hairpin technology has recently come to dominate the copper winding of traction drives. The research field of additive manufacturing (AM) of copper windings for e‑machines has made significant progress in recent years, but additive manufacturing has not yet prevailed over conventional technologies, despite the product advantages.</p><p>In this study the approach of transferring the complexity of conventional hairpin windings into additively manufactured busbar assemblies and then joining them to conventional windings using laser welding is investigated. The advantage is that the less complex components of an electric machine can still be manufactured conventionally with high productivity.</p><p>For this purpose, different design variants of the connection geometry are developed at the interconnection area of the busbars and manufactured from copper using PBF-LB/M. The manufactured design variants are then joined to the conventional copper conductors using a&#xa0;laser welding process. A&#xa0;comprehensive analysis and evaluation of the connections is then carried out in four main categories. The design, the electrical conductivity, the critical heating und real boundary conditions as well as and the weldability are examined. Three designs with promising results and requirement fulfilling properties were identified. The results show that functions like form fitting can directly be added to the AM parts and by the complexity transfer, both advantages of additive manufacturing and conventional manufacturing can be combined by means of laser welding.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Investigation of Design Potentials for Welding PBF-LB/M Manufactured Pure Copper Busbars to Conventional Copper Conductors

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年2月26日

查看全文
  • Carsten Putz,
  • Tim Grundmann,
  • Johannes Henrich Schleifenbaum

摘要

The advantages of the laser beam powder bed fusion process for metals (PBF-LB/M), such as geometric complexity due to increased design freedom or function integration, offer a great potential for optimizing products in the automotive sector. However, it often does not go beyond prototyping and small series as productivity is too low for the required quantities and economies of scale can rarely be exploited lucratively. In the field of e‑mobility, hairpin technology has recently come to dominate the copper winding of traction drives. The research field of additive manufacturing (AM) of copper windings for e‑machines has made significant progress in recent years, but additive manufacturing has not yet prevailed over conventional technologies, despite the product advantages.

In this study the approach of transferring the complexity of conventional hairpin windings into additively manufactured busbar assemblies and then joining them to conventional windings using laser welding is investigated. The advantage is that the less complex components of an electric machine can still be manufactured conventionally with high productivity.

For this purpose, different design variants of the connection geometry are developed at the interconnection area of the busbars and manufactured from copper using PBF-LB/M. The manufactured design variants are then joined to the conventional copper conductors using a laser welding process. A comprehensive analysis and evaluation of the connections is then carried out in four main categories. The design, the electrical conductivity, the critical heating und real boundary conditions as well as and the weldability are examined. Three designs with promising results and requirement fulfilling properties were identified. The results show that functions like form fitting can directly be added to the AM parts and by the complexity transfer, both advantages of additive manufacturing and conventional manufacturing can be combined by means of laser welding.