Scholarlink

<p>Although additive manufacturing can produce the complex geometry components, yet machining is required for the post-processing of imperfect parts generated in an additive manufacturing process. Machining is also required to conduct the repair and maintenance of additively manufactured parts. The current study delves into the CNC-controlled microwave-induced plasma drilling of additively manufactured short carbon fiber-reinforced polylactic acid composites. Effect of varying the initial machining gaps (IMGs) of 1&#xa0;mm, 2&#xa0;mm, and 3&#xa0;mm on the electric field intensity and plasma generation inside the applicator cavity was simulated using COMSOL finite element method. Further, the influence of varying the IMGs on tool wear and prominent hole characteristics, namely HAZ, overcut, and circularity was examined. The scanning electron microscopic images of eroded tools and drilled surfaces were acquired to apprehend the tool wear and material removal mechanisms. The hole characteristics were analyzed using the stereo microscopic images. As per the results, crystallographic anisotropy, thermal ablation, and thermal shock were the prominent tool wear mechanisms. The IMG of 1&#xa0;mm led to the best quality holes having the least HAZ (18.44 mm<sup>2</sup>) and overcut (1.98%). Moreover, melting and vaporization were the material removal mechanisms at different IMGs.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Electric field effects on tool wear and hole characteristics in microwave-induced plasma drilling of 3D printed carbon fiber PLA composites

  • 期刊论文

  • 发表日期：

    2025年9月29日

查看全文
  • Rampal,
  • Vishal Gupta,
  • Gaurav Kumar,
  • Prateek Saxena,
  • Sunny Zafar

摘要

Although additive manufacturing can produce the complex geometry components, yet machining is required for the post-processing of imperfect parts generated in an additive manufacturing process. Machining is also required to conduct the repair and maintenance of additively manufactured parts. The current study delves into the CNC-controlled microwave-induced plasma drilling of additively manufactured short carbon fiber-reinforced polylactic acid composites. Effect of varying the initial machining gaps (IMGs) of 1 mm, 2 mm, and 3 mm on the electric field intensity and plasma generation inside the applicator cavity was simulated using COMSOL finite element method. Further, the influence of varying the IMGs on tool wear and prominent hole characteristics, namely HAZ, overcut, and circularity was examined. The scanning electron microscopic images of eroded tools and drilled surfaces were acquired to apprehend the tool wear and material removal mechanisms. The hole characteristics were analyzed using the stereo microscopic images. As per the results, crystallographic anisotropy, thermal ablation, and thermal shock were the prominent tool wear mechanisms. The IMG of 1 mm led to the best quality holes having the least HAZ (18.44 mm2) and overcut (1.98%). Moreover, melting and vaporization were the material removal mechanisms at different IMGs.